Abstract:Fracture in aluminum alloys with precipitates involves at least two mechanisms, namely, ductile fracture of the aluminum-rich matrix and brittle fracture of the precipitates. In this work, a coupled crystal plasticity-phase field model for mixed ductile-brittle failure modes is formulated and used to investigate the effect of precipitate morphology and size distribution on damage evolution in aluminum alloys. A thermodynamically consistent framework for elastic and plastic work dissipation in the fracture process zone is used to formulate the coupled constitutive behavior for brittle and ductile damage, respectively. Representative Volume Elements (RVE) with varying particle morphology and orientation were generated and their uni-axial loading was simulated to assess the damage resistance of the different model microstructures. For critical energy release rate $G_c$ values of the aluminum matrix ranging from 4 to 8~Jm$^{-2}$ for single crystals and from 10 to 16~Jm$^{-2}$ for polycrystals, the model predicts a change in failure modes from particle debonding to cracking followed by ductile matrix failure. The change of particle failure mechanism as a result of increased $G_c$ is observed for both, single and polycrystalline model microstructures. For the case of particle debonding, microstructures with circular or ellipsoidal particles (with the major axis perpendicular to the loading direction) show a higher ductility and fracture work compared to the other studied cases. In the case of particle cracking, microstructures with ellipsoidal particles aligned parallel to the loading axis show a higher ductility and fracture work among the investigated cases. The simulations qualitatively reproduce the experimentally observed particle failure mechanisms (cracking and debonding) for two different matrix alloy classes (commercially pure and 2xxx alloys) reinforced with ceramic particles.

An Integrated Approach to Study the Hot Tearing Behavior by Coupling the Microscale Phase Field Model and Macroscale Casting Simulations

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Recent advances in hot tearing during casting of aluminium alloys

Mechanical Behavior of Mushy Zone in DC casting using a Viscoplastic Material Model

Prediction of hot tearing susceptibility of direct chill casting of AA6111 alloys via finite element simulations

Constitutive Behavior Predictions of Mushy Zone During Solidification by Phase Field Model and Coupled Eulerian–Lagrangian Method

A Study on the Numerical Simulation of Thermal Stress During the Solidification of Shaped Castings

A Simplified Hot-Tearing Criterion for Shape Castings Based on Temperature-Field Simulation

INTEGRATED FINITE ELEMENT MODEL FOR TRANSIENT FLUID FLOW AND THERMAL STRESSES DURING CONTINUOUS CASTING

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

A thermo-mechanical phase-field fracture model: application to hot cracking simulations in additive manufacturing

Effect of Intergranular Liquid Film Characteristics on Hot Tearing Formation of Hypereutectic Al–Si Alloy

Phase-Field Modeling of Coupled Brittle-Ductile Fracture in Aluminum Alloys

Influence of pre-precipitation on the multi-stage hot deformation behavior of an Al-Cu-Mg-Zr alloy: Experiments and integrated modeling

Revealing hot tear formation dynamics in Al–Cu alloys with X-ray radiography

Influence of cooling path on solidification morphology and hot tearing susceptibility of an Al−Cu−Fe−Mg−Si alloyEinfluss des Abkühlungsverlaufes auf die Erstarrungsmorphologie und Heißrissanfälligkeit einer Al−Cu−Fe−Mg−Si‐Legierung

Integrated Simulation of Castings Deformation during Casting and Heat Treatment Processes

AN ELASTIC-VISCOPLASTIC CONSTITUTIVE MODEL FOR SQUEEZE CASTING ALUMINUM ALLOY

Mechanical Properties and Fracture Behaviors of a Non-heat-treated Alloy in Varied Regions Within a Megacasting

Numerical Simulation of Thermal Stress of Shaped Casting Based on Rheological Model

Numerical Simulation and Experimental Investigation of Microstructure Evolution and Flow Behavior in the Rheological Squeeze Casting Process of A356 Alloy