Abstract:The precise assessment of the kinetic properties of graphite is crucial for the design of the material and the development of electrochemical models for lithium-ion batteries. However, conventional evaluation methods using composite electrodes fall short in excluding the influence of its porous structure and evaluating the influence of particle shape on kinetic behavior. In this work, we elucidate the impact of non-spherical morphology on kinetic behavior of single artificial graphite particle, employing the single-particle microelectrode technique. Three single artificial graphite particles with different sizes are pre-cycled and exhibit outstanding rate capability, maintaining a maximum capacity retention of 78.1 % at 200 C. Further, exchange current density and diffusion coefficients are determined through Tafel plots and the potentiostatic intermittent titration technique (PITT), respectively. It is found that the particle with a higher exposure of edge planes present elevated exchange current density and diffusion coefficients. Considering that the graphite particles typically feature an ellipsoidal rather than spherical shape, we propose an approach based on an ellipsoidal diffusion model for extracting diffusion coefficients. This model takes into account the non-spherical morphology of graphite, addressing the limitations inherent in the geometric assumptions of previous methods. The average relative error between the diffusion coefficients derived from the ellipsoidal diffusion model and the previous method using spherical assumptions is 215%, indicating that accurately depicting the shape of ellipsoidal graphite particles in the model is crucial for obtaining correct estimates of kinetic parameters. This study offers direct experimental evidence of superior kinetic behavior of edge planes over basal planes. To leverage this characteristic, it is recommended to employ an out-of-plane aligned architecture for composite electrodes using novel techniques, e.g., 3D printing or magnetic alignment techniques.

Quantification of the Carbon-Coating Effect on the Interfacial Behavior of Graphite Single Particles

Effects of Graphite Nanosheet Size on Thermal Storage Property of Composite PCMs

Effect of Carbon Coating on Electrochemical Performance of Treated Natural Graphite as Lithium-Ion Battery Anode Material

Measurement of Carbon Amount in Carbon-Coated Graphite by Thermal Analysis

Characterization of Carbon-Coated Natural Graphite as a Lithium-Ion Battery Anode Material

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Elucidating the Impact of Non-Spherical Morphology on Kinetic Behavior of Graphite Using Single-Particle Microelectrode

Preparation and Characterization of a Graphite Electrode Containing Carbon Nanotubes Grown in Situ by Flame Synthesis

A Comprehensive Study of Effects of Carbon Coating on Li[sub 4]ti[sub 5]o[sub 12] Anode Material for Lithium-Ion Batteries

Coke coating of natural graphite for Li-ion batteries

Study of Lithiation Mechanisms of High Performance Carbon-Coated Si Anodes by In-Situ Microscopy

Investigation of modification of Cu-Ni-graphite composite by silver

Effect of pitch crystallinity on electrochemical performance of graphite carbon coatings

Analysis Of The Interface In Graphite/Magnesium Composites At The Nanometer Scale

The influence of size and distribution of graphite on the friction and wear behavior of Ni–graphite coatings

Electrochemical Properties of Natural Graphite Fluorinated by ClF[sub 3] and NF[sub 3] in Propylene Carbonate-Containing Solvent

Pyrolytic Carbon Coated Graphite Anode for Lithium Ion Battery

Effect of Graphite Content on Properties of PEEK Composite Coatings

Thermal conductivity and mechanical properties of graphite/Mg composite with a super-nano CaCO3 interfacial layer

Accounting for the Quantum Capacitance of Graphite in Constant Potential Molecular Dynamics Simulations

Effect of Carbide Interlayers on the Microstructure and Properties of Graphene-Nanoplatelet-reinforced Copper Matrix Composites