Abstract:The selection and optimization of coating material/approach for electrode materials have been under intensive pursuit to address the high-voltage induced degradation of lithium ion batteries. Herein, we demonstrate an efficient way to enhance the high-voltage electrochemical performance of LiCoO2 cathode by postcoating of its composite electrode with Li4Ti5O12 (LTO) via magnetron sputtering. With a nanoscale (∼25 nm) LTO coating, the reversible capacity of LiCoO2 after 60 cycles is significantly increased by 40% (to 170 mAh g-1) at room temperature and by 118% (to 139 mAh g-1) at 55 °C. Meanwhile, the electrode's rate capability is also greatly improved, which should be associated with the high Li+ diffusivity of the LTO surface layer, while the bulk electronic conductivity of the electrode is unaffected. At 12 C, the capacity of the coated electrode reaches 113 mAh g-1, being 70% larger than that of the uncoated one. The surface interaction between LTO and LiCoO2 is supposed to reduce the space-charge layer at the LiCoO2-electrolyte interface, which makes the Li+ diffusion much easier as evidenced by the largely enhanced diffusion coefficient of the coated electrode (an order of magnitude improvement). In addition, the LTO coating layer, which is electrochemically and structurally stable in the applied potential range, plays the role of a passivation layer or an artificial and friendly solid electrolyte interface (SEI) layer on the electrode surface. Such protection is able to impede propagation of the in situ formed irreversible SEI and thus guarantee a high initial columbic efficiency and superior cycling stability at high voltage.

A Comprehensive Study of Effects of Carbon Coating on Li[sub 4]ti[sub 5]o[sub 12] Anode Material for Lithium-Ion Batteries

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Structural Analysis and Electrochemical Studies of Carbon Coated Li4ti5o12 Particles Used As Anode for Lithium Ion Battery

Effects of Carbon Coatings on Nanocomposite Electrodes for Lithium-Ion Batteries

Effect of carbon coating on electrochemical performance of Li 1.048 Mn 0.381 Ni 0.286 Co 0.286 O 2 cathode material for lithium-ion batteries

Effect of TiO2-coating on the Electrochemical Performances of LiCo1/3Ni1/3Mn1/3O2

Enhanced electrochemical performance of Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 cathode material coated with Li + -conductive Li 2 SiO 3 for lithium ion batteries

High-voltage Performance of LiCoO2 Cathode Studied by Single Particle Microelectrodes –influence of Surface Modification with TiO2

Carbon coating to suppress the reduction decomposition of electrolyte on the Li 4Ti 5O 12 electrode

Effect of TiO 2 -Coating on Structure and Electrochemical Performance of LiCo 0.2 Ni 0.4 Mn 0.4 O 2

Enhanced Rate Performance of Carbon-Coated Lini0.5mn1.5o4 Cathode Material for Lithium Ion Batteries

Carbon-Coated Li4ti5o12 As A High Rate Electrode Material for Li-Ion Intercalation

Enhanced Interfacial Kinetics and High-Voltage/High-Rate Performance of Licoo2 Cathode by Controlled Sputter-Coating with A Nanoscale Li4ti5o12 Ionic Conductor

Effect of Carbon-Coating on Internal Resistance and Performance of Lithium Iron Phosphate Batteries

Enhanced Cycling Stability of Microsized Licoo2 Cathode by Li4ti5o12 Coating for Lithium Ion Battery

Li4ti5o12-Coated Graphite Anode Materials for Lithium-Ion Batteries

B‐Doped Carbon Coating Improves the Electrochemical Performance of Electrode Materials for Li‐Ion Batteries

Preparation of carbon encapsulated Li4Ti5O12 anode material for lithium ion battery through pre-coating method

Carbon-coated lithium titanate: effect of carbon precursor addition processes on the electrochemical performance

Effect of Carbon Coating on Electrochemical Performance of Treated Natural Graphite as Lithium-Ion Battery Anode Material

Effect of carbon coating on improved electrical and electrochemical performance of Li3Co2SbO6