Abstract:Lithium-nickel-cobalt-aluminum (NCA) material coated by a 10-nm thick LiTiO2 (LTO) layer was prepared using a method based on hydrolysis combined with a solvothermal process. The effects of LTO modifications on the structure, morphology, gas generation, and electrochemical performance of this NCA material were investigated by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Gas Chromatography-Mass Spectrometer, and electrochemical tests. The results vividly showed that the LTO layer was uniformly coated on NCA surfaces and titanium addition (1 wt%) for these modified results was crucial. The residual lithium on the surface of NCA material was efficiently resumed by LTO synthesis reaction without extra effects on the morphology and structure of NCA material. LTO treatment can significantly improve the processability, gas production performance, and the electrochemical properties of NCA material. After cycling 100 times at 25 °C with the current rate of 1C, optimized NCAT1 electrodes maintained a high discharge capacity at 164.6 mA·h·g−1 compared to NCA electrodes at 152.3 mA·h·g−1. On the other hand, the high-rate discharge capacity of NCAT1 electrodes at 10 C was also maintained at 135.0 mA·h·g−1, contrasted with NCA electrodes at only 125.0 mA·h·g−1. The enhancement of electrochemical performance was ascribed to the LTO-coating layer, which improved ionic conductivity, reduced interface resistance, and protected the core NCA material.

Preparation of carbon encapsulated Li4Ti5O12 anode material for lithium ion battery through pre-coating method

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Structural Analysis and Electrochemical Studies of Carbon Coated Li4ti5o12 Particles Used As Anode for Lithium Ion Battery

Preparation and Characterization of Porous Spherical Li_4Ti_5O_(12)/C Anode Material for Lithium Ion Batteries

Effect of TiO2-coating on the Electrochemical Performances of LiCo1/3Ni1/3Mn1/3O2

Preparation and Electrochemical Performance of Li4Ti5O12/Co3O4 Composite as an Anode of Lithium-Ion Battery

A Comprehensive Study of Effects of Carbon Coating on Li[sub 4]ti[sub 5]o[sub 12] Anode Material for Lithium-Ion Batteries

High rate Li 4 Ti 5 O 12 @C anode material fabricated by a facile carbon coating method

Carbon-Coated Nano-Sized Li4ti5o12 Nanoporous Micro-Sphere As Anode Material for High-Rate Lithium-Ion Batteries

Facile Synthesis of Carbon‐Encapsulated Li4Ti5O12@C Hollow Microspheres As Superior Anode Materials for Li‐Ion Batteries

Synthesis of Carbon-Coated Li 4 Ti 5 O 12 and Its Electrochemical Performance As Anode Material for Lithium-Ion Battery

Effect of carbon coating on electrochemical performance of Li 1.048 Mn 0.381 Ni 0.286 Co 0.286 O 2 cathode material for lithium-ion batteries

Preparation and characterization of nano-Li_4Ti_5O_(12)/C composite materials

Carbon coating to suppress the reduction decomposition of electrolyte on the Li 4Ti 5O 12 electrode

Electrochemical Performance of Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub>/TiO<sub>2</sub>/Li<sub>0.4</sub>TiO<sub>2</sub>/C Composite Prepared by the Electrospinning Method Using as Lithium Battery Anode Material

A facile strategy to prepare nano-crystalline Li4Ti 5O12/C anode material via polyvinyl alcohol as carbon source for high-rate rechargeable Li-ion batteries

Preparation of Carbon-Coated LiFe0.2Mn0.8PO4 Cathode Material and Its Application in a Novel Battery with Li4Ti5O12 Anode

Carbon-coated Li4Ti5O12–TiO2 Microspheres As Anode Materials for Lithium Ion Batteries

LiTiO2 coating toward enhanced nickel-rich LiNi0.815Co0.15Al0.035O2 cathode in lithium-ion batteries

Enhancement of Electrochemical Performance of Li[Li0.2Mn0.54Ni0.13Co0.13]O2 by Surface Modification with Li4Ti5O12

Al2O3 Coated Li4Ti5O12 Electrode with Enhanced Cycle Performance for Lithium Ion Battery