Abstract:Olivine LiFePO4 has been widely used as cathode material in lithium-ion batteries for electric vehicles (EV) due to high safety and long life. Its main drawback is low voltage plateau (3.5V). Recently, studies of LiMnPO4 have been paid more attention because it possesses the same structure and theoretical capacity as LiFePO4, but higher voltage plateau (4.1V). However, the poor conductivity limits its uses. Some modification methods such as ion-doping, carbon coating etc. have been investigated to improve its electrochemical properties, and the results in many papers indicated that LiMn1-xFexPO4/C (x=0.2~0.5) nano-particle composite cathode materials prepared by hydrothermal method can present promising electrochemical performance. For such method, how to use simple process to achieve LiMn1-xFexPO4/C nano-particles with high crystallization and dispersion is an important issue to be solved urgently at present. In this work, a simple and high effective hydrothermal preparation process for LiMn0.7Fe0.3PO4/C was proposed. In such process, the synthesis and carbon coating of LiMn0.7Fe0.3PO4 was completed in one-step. The structural and electrochemical properties of as-prepared materials were studied by using XRD, SEM, electrochemical impedance and charge-discharge tests technologies. The carbon sources and surfactant added in the process were optimized. The results show that when using CTAB as surfactant and glucose as carbon source, one-step process make LiMn0.7Fe0.3PO4/C obtain more uniform coated carbon, more controlled crystal particle growth and dispersion, more excellent electrochemical performance while compared with two-step process including hydrothermal synthesis followed by carbon-coating process. CTAB content exhibits little effect on crystal lattice parameters, structure and coated-carbon amounts of as-prepared materials. However, it displays great impact on the crystal particle size, carbon coating uniformity and particle dispersion. With gradual increase of CTAB content to 2.5g (in 40ml reaction liquid), as-prepared samples show an improved carbon coating uniformity, elevated Li+ diffusion coefficient, reduced electric charge transfer resistance, and remarkable enhanced capacity, rate capability and energy density. It presents a capacity of 143.5 mAh/g at 0.5C and 112.6 mAh/g at 5C, respectively. It is also noticeable that the sample exhibits an energy density of 499.3Wh/kg, 457.8Wh/kg and 349.7Wh/kg at 1C, 2C and 5C rate respectively. In addition, other surfactants that can also be used as carbon sources at the same time were also investigated, and it is found that some surfactant can substitute for CTAB+glucose to further simplify process and lower cost.

Preparation of Carbon-Coated LiFe0.2Mn0.8PO4 Cathode Material and Its Application in a Novel Battery with Li4Ti5O12 Anode

Ascorbic Acid-Assisted Solvothermal Synthesis of LiMn 0.9 Fe 0.1 PO 4 /C Nanoplatelets with Enhanced Electrochemical Performance for Lithium Ion Batteries

High-performance Carbon-Coated LiMnPO4 Nanocomposites by Facile Two-Step Solid-State Synthesis for Lithium-Ion Battery

Preparation and Electrochemical Properties of Carbon-Coated LiMn0.6Fe0.4PO4 Cathode Material for Lithium-Ion Batteries

Olivine LiFePO4 Nanocrystallites Embedded in Carbon-Coating Matrix for High Power Li-ion Batteries

Microsphere LiMn0.6Fe0.4PO4/C Cathode with Unique Rod-Like Secondary Architecture for High Energy Lithium Ion Batteries

A Novel Synthesis and Characterization of LiFePO4 and LiFePO4/C As a Cathode Material for Lithium-Ion Battery

A Novel Material Li2NiFe2O4: Preparation and Performance As Anode of Lithium Ion Battery

Performance of LiFePO4 as lithium battery cathode and comparison with manganese and vanadium oxides

Enhancing electrochemical performance of Mn doped LiFePO4 cathode materials for lithium-ion batteries

Based on first-principles calculation, study on the synthesis, and performance of Fe–Ni co-doped LiMnPO4/C as cathode material for lithium-ion batteries

Simple Hydrothermal Preparation of High Performance LiMn0.7Fe0.3PO4/C Nano-Particle Cathode Materials

Three-Dimensional Carbon-Coated LiFePO4 Cathode with Improved Li-Ion Battery Performance

Mn-doped LiFePO 4 @C as a high-performance cathode material for lithium-ion batteries

Preparation and Electrochemical Properties of LiNi2/3Co1/6Mn1/6O2 Cathode Material for Lithium-Ion Batteries

Synthesis Mechanism and Characterization of LiMn 0.5 Fe 0.5 PO 4 /C Composite Cathode Material for Lithium -Ion Batteries

An inexpensive preparation of unique nano-micro porous LiFePO4 cathode with excellent rate capability for lithium-ion batteries

Impedance studies of LiMn0.8Fe0.2PO4/C cathodes for lithium-ion batteries

Preparation and Electrochemical Properties of LiNi<sub>2/3</sub>Co<sub>1/6</sub>Mn<sub>1/6</sub>O<sub>2</sub> Cathode Material for Lithium-Ion Batteries

Optimized Ni-rich LiNi0.83Co0.06Mn0.06Al0.05O2 cathode material with a Li1.3Al0.3Ti1.7(PO4)3 fast ion conductor coating for Lithium-ion batteries

Nano-scale hollow structure carbon-coated LiFePO4 as cathode material for lithium ion battery