Abstract:With excellent mechanical properties, the magnesium matrix composites reinforced by carbon (graphite) fibers (C/Mg) are widely used in industry. Although magnesium and carbon have high chemical compatibility, the C/Mg interface becomes complex after aluminum has been added to. Therefore it is the matrix. It is very important to investigate the microstructure at and near the interface during the manufacture high performance ZM5 magnesium alloys (7.5w%similar to 9.0 w% Al) reinforced with carbon. Graphite fiber were made by vacuum pressure infiltration. After dimpling and ion milling, the specimens were observed under the transmission electron microscope. Although the bonding between the fiber and the matrix was found to be good, a concentration of Al was found at the interface. The microstructure of the interface changes in response to a change of fiber graphitization. The reason is due to the existence of more nucleation sites on the surface of carbon fiber determined by selected area diffraction and EDS. The other phase found at the interface is gamma-Mg17Al12, which precipitated out from the matrix. The gamma phase has an orientation relationship to the matrix. In addition to the gamma phase, dislocations and twins are found at and near the interface. Due to the existence of dislocations, a residual strain layer, about 100 nm similar to 200 nm wide appears. The maximum strain in the layer is about several permillage. On the other hand, under the high resolution microscope the SiC coating is found good to the bonding of the fiber and matrix because of the magnesium oxide in the transition area which is formed during manufacturing.

Analysis Of The Interface In Graphite/Magnesium Composites At The Nanometer Scale

Study of the C/ Mg Interface in Magnesium Matrix Composites Reinforced by Carbon (Graphite) Fiber

High-Resolution Electron Microscope Observation of Interface Microstructure of A Cast Al-Mg-Si-Bi-Pb(6262)/Al2o3p Composite

Thermal conductivity and mechanical properties of graphite/Mg composite with a super-nano CaCO3 interfacial layer

Characterization of the reaction products and precipitates at the interface of carbon fiber reinforced magnesium–gadolinium composite

Micro-structural and tensile strength analyses on the magnesium matrix composites reinforced with coated carbon fiber

The Interface Structure and Property of Magnesium Matrix Composites: A Review

Interfacial Characteristic of As-Deformed SiCp-Reinforced Magnesium Matrix Composite

Effect of MgO particles with in-situ graphene coating on mechanical and thermal expansion properties of aluminum matrix composites

Interface reaction and thermodynamic analysis on the magnesium alloy matrix composite reinforced with alumina silicate short fibers

Types of Component Interfaces in Metal Matrix Composites on the Example of Magnesium Matrix Composites

Interface microstructure and mechanical property of (Al2O3-SiO2)sf/AZ91D composite

Morphology of Second-Phase Precipitates in Carbon-Fiber- and Graphite-Fiber-reinforced Magnesium-Based Metal-Matrix Composites

Microstructural Evolution in Graphene Nanoplatelets Reinforced Magnesium Matrix Composites Fabricated Through Thixomolding Process

Interfacial microstructure and strengthening mechanisms of Cf/Mg composite with double-layer interface

Microstructural analysis of a carbon fibre reinforced AZ91D magnesium alloy composite

Interface Reaction and Thermodynamic Analysis on Al2o3-Sio2(Sf)/Az91d Composite

Decipher the Ultra-High Strengthening and Toughening Efficiency of GNS-MgO/Mg Layered Composite with In-Situ Enhanced Interface

Microstructure, Mechanical and Wear Properties of Short Carbon Fiber-Reinforced AM50 Magnesium Matrix Composite

Surface Coatings of Reinforcement Phases in Magnesium Matrix Composites: A Review

Fabrication of magnesium-coated graphene and its effect on the microstructure of reinforced AZ91 magnesium-matrix composites