Abstract:The interface structure and infiltration effect between reinforcement (CFs) and Al matrix have a significant impact upon comprehensive properties of the resulting carbon-fibre-reinforced Al matrix (CF/Al) composites. In present study, Ni coatings with different thicknesses were evenly coated onto carbon fibres (CFs) via electroplating for the purpose of promote the interface combining effect and reduce adverse interfacial reaction betwixt CFs and Al matrix. The influence of pH value (2, 3, 4, 5, 6), current density (0.1 A, 0.2 A, 0.3 A, 0.4 A, 0.5 A, 0.6 A), electroplating time (2 min, 4 min, 6 min) on surface appearance and tensile strength of Ni-coated CFs were discussed. The results show that the Ni-coated CFs with excellent integrity and mechanical properties was obtained at a current density of 0.4 A and a pH of 5. Subsequently, twin-roll casting and T6 heat treatment process were used to fabricate CF/Al composites with varying Ni coating thicknesses. Using SEM, TEM and tensile property testing, the impact of Ni coating thickness (0 μm, 0.35 μm, 0.58 μm, 0.76 μm) on interfacial microstructures and mechanical characteristics of CF/Al composites were examined. The results exhibit that the 0.76 μm Ni-coated CF/Al composites exhibit best UTS and elongation of 151.6 MPa and 11.7 %, respectively. This is due to a thicker Ni coating preventing the CFs against reaction with Al matrix during processing the composites, which reduces the generation of Al 4 C 3 phase. However, when the coating thickness is 0.35 μm, adverse chemical interactions occur at interface of Al-CFs, leading to the formation of an Al 4 C 3 phase. Finally, the strengthening mechanism of Ni-coated CF/Al composites was analyzed, and its strengthening model was established. This study can provide a pratical route to prepare and applicate the high-quality continuous CF/Al composites.

Microstructure and compressive properties of Mg–9Al composite reinforced with Ni-coated graphene nanosheets

Architectured interfacial interlocking structure for enhancing mechanical properties of Al matrix composites reinforced with graphene nanosheets

Microstructures and electrochemical hydrogen storage properties of novel Mg–Al–Ni amorphous composites

Effect of SiC nanoparticle on microstructure and mechanical properties of graphene nanosheet (GNS) reinforced aluminum composites

Mechanical Properties of Powder Metallurgy Nickel‐Based Superalloy Composite Reinforced by Low Content Graphene Nanosheets

AZ91 alloy nanocomposites reinforced with Mg-coated graphene: Phases distribution, interfacial microstructure, and property analysis

Microstructural Evolution in Graphene Nanoplatelets Reinforced Magnesium Matrix Composites Fabricated Through Thixomolding Process

Fabrication of magnesium-coated graphene and its effect on the microstructure of reinforced AZ91 magnesium-matrix composites

Graphene Nanoplatelets Reinforced Magnesium Matrix Composites Fabricated by Thixomolding

Effect of MgO particles with in-situ graphene coating on mechanical and thermal expansion properties of aluminum matrix composites

Microstructure and electrochemical properties of amorphous composites of ball-milled Mg2Ni0.95Sn0.05 + x wt% Ni

Graphene nano-platelets reinforced aluminum composites with anisotropic compressive properties

Microstructure refinement and mechanical properties enhancement of Mg Al alloys via a novel of MgO nanoparticles modified graphene nanoplates refiner by in-situ synthesis

Preparation and Properties of Ni–W Composite Coatings Reinforced by Graphene Nanoplatelets

Microstructure and Properties of a Graphene Reinforced Cu–Cr–Mg Composite

Reinforced AZ91D magnesium alloy with thixomolding process facilitated dispersion of graphene nanoplatelets and enhanced interfacial interactions

Microstructure, Mechanical and Wear Properties of Short Carbon Fiber-Reinforced AM50 Magnesium Matrix Composite

Effect of surface modification on interfacial microstructures and mechanical properties of continuous CF/Al composites

Microstructure, Interface and Strengthening Mechanism of Ni-CNTs/AZ91 Magnesium Matrix Composites

Simultaneously improved mechanical and thermal properties of Mg-Zn-Zr alloy reinforced by ultra-low content of graphene nanoplatelets

Enhancing Mechanical Properties of Graphene/Aluminum Nanocomposites via Microstructure Design Using Molecular Dynamics Simulations