Study of the C/ Mg Interface in Magnesium Matrix Composites Reinforced by Carbon (Graphite) Fiber

Yu Chen,Guoding Zhang,Feng Wu.,Jing Zhu
1997-01-01
Rare Metal Materials and Engineering
Abstract:With excellent mechanical properties, the magnesium matrix composites reinforced by carbon (graphite) fibers (C/Mg) are widely used in industry. Although magnesium and carbon have high chemical compatibility, the C/Mg interface becomes complex after aluminum has been added to. Therefore it is the matrix. It is very important to investigate the microstructure at and near the interface during the manufacture high performance ZM5 magnesium alloys (7.5w%similar to 9.0 w% Al) reinforced with carbon. Graphite fiber were made by vacuum pressure infiltration. After dimpling and ion milling, the specimens were observed under the transmission electron microscope. Although the bonding between the fiber and the matrix was found to be good, a concentration of Al was found at the interface. The microstructure of the interface changes in response to a change of fiber graphitization. The reason is due to the existence of more nucleation sites on the surface of carbon fiber determined by selected area diffraction and EDS. The other phase found at the interface is gamma-Mg17Al12, which precipitated out from the matrix. The gamma phase has an orientation relationship to the matrix. In addition to the gamma phase, dislocations and twins are found at and near the interface. Due to the existence of dislocations, a residual strain layer, about 100 nm similar to 200 nm wide appears. The maximum strain in the layer is about several permillage. On the other hand, under the high resolution microscope the SiC coating is found good to the bonding of the fiber and matrix because of the magnesium oxide in the transition area which is formed during manufacturing.
What problem does this paper attempt to address?