Abstract:In high-performance Al-Cu-Li alloys with low Li-content, δ′-precipitates exist often by enveloping the Guinier-Preston zones and θ′-precipitates, forming so-called composite phases or precipitates. Using atomic-resolution Scanning transmission electron microscopy and energy calculations, we studied these composite phases for their interface structures and microstructure evolution in relation with the mechanical property of the alloys. It is found that all the composite phases have similar interface structures in terms of Cu-Li bonding: interfacial Li-atoms are required to occupy the second nearest neighbor sites to interfacial Cu-atoms. Two types of relations, “anti-phase” and “in-phase” relationships, exist between the two sideward δ′-precipitates in the δ′/θ′/δ′ composite precipitates, depending on the number of Cu-layers contained in the inward θ′-precipitate. Furthermore, it is shown that an “anti-phase” composite precipitate has to become an “in-phase” one when the Cu-layers in the θ′-precipitate increase by growing thick from even to odd number, and vice versa. Since thickening of the θ′-precipitates in these composite precipitates has to be accomplished through a layer-by-layer mechanism, their growth involves the switching of interface relationships with significant structure modifications (until the sideward δ′-precipitate adapts to the final optimized interface structure). As such, the coarsening of these precipitates can generally be depressed upon thermal heating, leading to fine precipitate microstructure of the alloys. It is also demonstrated by first-principles calculations that formation of the composite phases greatly lowers the total system energy, owing to significant decrement of interfacial energy as the θ′/Al interfaces are replaced by the Al/δ′/θ′/δ′/Al interfaces.

Growth mode of interfacial products of C sf /Mg-7.6Al composites

High-Resolution Electron Microscope Observation of Interface Microstructure of A Cast Al-Mg-Si-Bi-Pb(6262)/Al2o3p Composite

Effect of Mg on Nucleation Process of Recrystallization in Al–Mg–Si/SiCp Composite

Interfacial Segregation and Precipitates Behavior in the Ultrafine Grained Al-based Metal Matrix Composites

Study of the C/ Mg Interface in Magnesium Matrix Composites Reinforced by Carbon (Graphite) Fiber

First-Principles Calculations on Mg/Al4c3 Interfaces

Effects of interfacial diffusion induced infiltration process on the microstructure evolution and interfacial enhancement of CF/Mg composites

Interfacial Regulation and Fracture Mechanism of Al–Si/SiC Composites Infiltrated under Super-Gravity Field

Interfacial structure evolution of the growing composite precipitates in Al-Cu-Li alloys

Interface Investigations of Alumina and Aluminosilicate Short-Fiber-reinforced Aluminum-Alloy Composites

Effect of interfacial stability on microstructure and properties of carbon fiber reinforced aluminum matrix composites

Effect of MgO particles with in-situ graphene coating on mechanical and thermal expansion properties of aluminum matrix composites

Interfacial Modification and Performance Enhancement of Carbon Matrix/aluminum Composites

Interfacial reaction of aluminum borate whisker reinforced Mg-10Gd-3Y-1Zn-0.4Zr (wt%) alloy matrix composite

Strengthening Mechanism and Damping Properties of SiCf/Al-Mg Composites Prepared by Combining Colloidal Dispersion with a Squeeze Melt Infiltration Process

Interfacial Bonding of Al-Si/C Composites and Improvement of the Thermal Shock Resistance

Interfacial microstructure and strengthening mechanisms of Cf/Mg composite with double-layer interface

Probing the stability, adhesion strength, and fracture mechanism of Mg/Al 2 Y interfaces via first-principles calculations

Mechanical properties and fracture behavior of Al(111)/MgAlB4(0001) interface in Al matrix composites: A first-principle calculation study

Interfacial Reactions and Mechanical Properties Studies of C-Coated and C/B4C Duplex-Coated SiC Fiber-Reinforced Ti2AlNb Composites