Abstract:Mn-Co Spinel is considered as one of the most promising materials for the interconnect protection of solid oxide fuel cells; however, its conductivity is too low to maintain a high cell performance as compared with cathode materials. Element doping is an effective method to improve the spinel conductivity. In this work, we proposed doping Mn-Co spinel powder with Cu via a solid phase reaction. CuδMn1.5−xCo1.5−yO4 with δ = 0.1, 0.2, 0.3, and x + y = δ was obtained. X-ray diffraction (XRD) and thermogravimetry-differential scanning calorimetry (TG-DSC) were used to evaluate the Cu-doping effect. After sintering at 1000 °C for 12 h, the yield exhibited the best crystallinity, density, and element distribution, with a phase composition of MnCo2O4/CuxMn3−xO4 (x = 1, 1.2, 1.4 or 1.5). X-ray photoelectron spectroscopy (XPS) was used to semi-quantitatively characterize the content changes in element valence states. The areal fraction of Mn2+ and Co3+ was found to decrease when the sintering duration increased, which was attributed to the decomposition of the MnCo2O4 phase. Finally, coatings were prepared by atmospheric plasma spraying with doped spinel powders and the raw powder Mn1.5Co1.5O4. It was found that Cu doping can effectively increase the conductivity of Mn-Co spinel coatings from 23 S/cm to 51 S/cm. Although the dopant Cu was found to be enriched on the surface of the coatings after the conductivity measurement, which restrained the doping effect, Cu doping remains a convenient method to significantly promote the conductivity of spinel coatings for SOFC applications.

Investigation of high‐entropy alloy derived spinel‐based layer for SOFC cathode‐side contact application

Evaluation of the Reactive-Sintered (mn,co)3o4 Spinel Layer for SOFC Cathode-Side Contact Application

Co-Sintering of Spinel-Based Coating/Contact Dual-Layer Structure for Solid Oxide Fuel Cell Cathode-Side Application

Effect of MnCoNiFeCu Alloy on Oxidation Behavior and Electrical Performance of AISI 441 for SOFC Interconnect Application

Thermal Growth and Performance of Manganese Cobaltite Spinel Protection Layers on Ferritic Stainless Steel SOFC Interconnects

The electrical property of MnCo2O4 and its application for SUS 430 metallic interconnect

Development of the Spinel Powder Reduction Technique for Solid Oxide Fuel Cell Interconnect Coating

Review—(Mn,Co)3O4-Based Spinels for SOFC Interconnect Coating Application

Cu doped Mn-Co spinel protective coating on ferritic stainless steels for SOFC interconnect applications

High-entropy FeCoNiMnCu alloy coating on ferritic stainless steel for solid oxide fuel cell interconnects

The Investigation of In-Situ Protection Effect of LaCo0.6Ni0.4O3-δ Cathode Contact Layer on High Temperature Oxidation of Fe-16Cr Alloy As Solid Oxide Fuel Cell Interconnect

Mn 1.4 Co 1.4 Cu 0.2 O 4 spinel protective coating on ferritic stainless steels for solid oxide fuel cell interconnect applications

Cu-Fe spinel coating as oxidation barrier for Fe-16Cr metallic interconnect in solid oxide fuel cells

Investigation of MnCu0.5Co1.5O4 spinel coated SUS430 interconnect alloy for preventing chromium vaporization in intermediate temperature solid oxide fuel cell

Influences of Composite Electrodeposition Parameters on the Properties of Ni-Doped Co-Mn Composite Spinel Coatings

Mn–Co spinel protective–conductive coating on AL453 ferritic stainless steel for IT-SOFC interconnect applications

Oxidation of MnCu0.5Co1.5O4 Spinel Coated SUS430 Alloy Interconnect in Anode and Cathode Atmospheres for Intermediate Temperature Solid Oxide Fuel Cell

High Temperature Oxidation Behavior of SUS430 SOFC Interconnects with Mn-Co Spinel Coating in Air

Cufe2o4 Nano-Spherical Powder Directly Served As Interconnect Coating for Solid Oxide Fuel Cells Applications

Highly Conductive Mn-Co Spinel Powder Prepared by Cu-Doping Used for Interconnect Protection of SOFC

Characterization of the conductive protection layers on alloy interconnect for SOFC