Abstract:In this work, ultra‐thin electron‐ion dual conductor coating on the surface and Al gradient doping in the bulk phase of NCM523 is successfully achieved by ALD, which simultaneously enhances the conductivity and stability of NCM523 at high‐voltage. This modification has enabled NCM523 to achieve high‐capacity performance and long cycle life under ultra‐high current density (1900 mAh g−1, 10 C) at 4.6 V. Simultaneously achieving high‐energy‐density and high‐power‐density is a crucial yet challenging objective in the pursuit of commercialized power batteries. In this study, atomic layer deposition (ALD) is employed combined with a coordinated thermal treatment strategy to construct a densely packed, electron‐ion dual conductor (EIC) protective coating on the surface of commercial LiNi0.5Co0.2Mn0.3O2 (NCM523) cathode material, further enhanced by gradient Al doping (Al@EIC‐NCM523). The ultra‐thin EIC effectively suppresses side reactions, thereby enhancing the stability of the cathode‐electrolyte interphase (CEI) at high‐voltages. The EIC's dual conduction capability provides a potent driving force for Li+ transport at the interface, promoting the formation of rapid ion deintercalation pathways within the Al@EIC‐NCM523 bulk phase. Moreover, the strategic gradient doping of Al serves to anchor the atomic spacing of Ni and O within the structure of Al@EIC‐NCM523, curbing irreversible phase transitions at high‐voltages and preserving the integrity of its layered structure. Remarkably, Al@EIC‐NCM523 displays an unprecedented rate capability (114.7 mAh g−1 at 20 C), and a sustained cycling performance (capacity retention of 74.72% after 800 cycles at 10 C) at 4.6 V. These findings demonstrate that the proposed EIC and doping strategy holds a significant promise for developing high‐energy‐density and high‐power‐density lithium‐ion batteries (LIBs).

Multipoint adsorption constructs stable interface chemistry for high-nickel cathode material

Superior Stability Secured by a Four-Phase Cathode Electrolyte Interface on a Ni-Rich Cathode for Lithium Ion Batteries

Surface Coating of NCM523 Cathode Electrodes by the Difunctional Block Copolymer/Lithium Salt Composites

Chemical Cross‐linked Electrode–Electrolyte Interface Boosting the Structural Integrity of High Nickel Cathode Materials

Anchoring Interfacial Nickel Cations by Tunable Coordinative Structure for Highly Stabilized Nickel-Rich Layered Oxide Cathodes

Simultaneous modulation of cathode/anode and electrolyte interfaces via a nitrile additive for high-energy-density lithium-metal batteries

Nonsacrificial Nitrile Additive for Armoring High-Voltage LiNi0.83 Co0.07 Mn0.1 O2 Cathode with Reliable Electrode-Electrolyte Interface toward Durable Battery.

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li<SUP>+</SUP>-conducting cathode-electrolyte interphase

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

Regulating the Electrode-Electrolyte Interfaces of Lithium-High Nickel Batteries via a Multifunctional Additive

Surface-targeted functionalization of nickel-rich cathodes through synergistic slurry additive approach with multi-level impact using minimal quantity

Constructing fast-ion-diffusion cathode-electrolyte-interphase to improve LiNi0.8Co0.1Mn0.1O2 cathode cyclic stability with composite polymer conductors

Regulation of Interface Ion Transport by Electron Ionic Conductor Construction toward High‐Voltage and High‐Rate LiNi0.5Co0.2Mn0.3O2 Cathodes in Lithium Ion Battery

Multifunctional Electrolyte Additive for High-Nickel LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathodes of Lithium-Metal Batteries

Synergistic Effect of B-Nb Co-modified to Achieve Crystal Structure and Interface Tuning for Ni-rich Cathode

Improving interfacial stability of ultrahigh-voltage lithium metal batteries with single-crystal Ni-rich cathode via a multifunctional additive strategy

Bifunctional Self-Assembled Molecular Layer Enables Stable Ni-rich Cathodes

Interface Chemical Reconstruction with Residual Lithium Compounds on Nickel-Rich Cathode by Nonstoichiometrical MoO3-x Coating Enables High Stability

An epitaxial coating with preferred orientation stabilizing High-Energy Ni-Rich NCA cathodes

Double Conductor Coating to Improve the Structural Stability and Electrochemical Performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Material

Manipulation of an ionic and electronic conductive interface for highly-stable high-voltage cathodes