Abstract:To satisfy the increasing energy density requirements for electric vehicles and grid-scale energy storage systems, Ni-rich layered oxide cathode materials are often fabricated as micron-sized secondary spherical particles consisting of nanosized single crystals. Unfortunately, the hierarchical structure inevitably induces intergranular cracks and parasitic reactions at the cathode–electrolyte interphase, aggravating chemomechanical instability and seriously hindering their practical application. Here, we propose a nanowelding strategy to build consolidation points at the grain boundary of the primary particles, which dramatically enhances the capacity retention and chemomechanical stability. Meanwhile, the oxygen vacancies in the ceria-based solid electrolyte possessing oxygen adsorbing and storage capability can restrain the active oxygenates in the surficial lattice to avoid oxygen evolution. Experimental characterization further confirms that this unique architecture can effectively prevent the liquid electrolyte from penetrating into the active material along the grain boundary and consequently eliminate the adverse effects, including intergranular cracks, cathode electrolyte interface formation and growth, and the layered structure-rock salt phase irreversible transition. This finding provides a promising approach to realize the rapid commercialization of highly stabilized nickel-rich cathode materials for high-performance lithium-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c20100?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c20100</a>.SEM images of the "nanowelding" points coating NCM811 samples; EDS spectra of as-prepared samples; dQ/dV versus V plots derived from consecutive cycling of the NCM811 electrode; comparison on the initial Coulomb efficiency, cycling performance and rate performance with those reported in the literature; Rietveld refinement results of NW1, NW2, and NW3 samples and the corresponding structure parameters; XPS spectra and fitting results for obtained samples; EDS mapping of Ni, Co, Mn, and F elements and EDS spectra for cycled NCM811 (a) and NW3 electrodes; and STEM images of NCM811 and NW3 electrodes (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c20100/suppl_file/am0c20100_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Chemical Cross‐linked Electrode–Electrolyte Interface Boosting the Structural Integrity of High Nickel Cathode Materials

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Anchoring Interfacial Nickel Cations by Tunable Coordinative Structure for Highly Stabilized Nickel-Rich Layered Oxide Cathodes

In Situ Polymerization Anchoring Effect Enhancing the Structural Stability and Electrochemical Performance of the LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Material

Multipoint adsorption constructs stable interface chemistry for high-nickel cathode material

Stabilizing the Interphase in an Ultra-High-Nickel Cathode Enabling High-Performance Lithium-Ion Batteries

Self-repaired Cathode Electrolyte Interphase to Stabilize the High-Nickel Cathode Interface by a Sustained-Release Multifunctional Electrolyte Additive

Enabling the Strengthened Structural and Interfacial Stability of High‐Nickel LiNi0.9Co0.05Mn0.05O2 Cathode by a Coating‐Doping‐Microstructure Regulation Three‐In‐One Strategy

Stabilizing surface chemical and structural Ni-rich cathode via a non-destructive surface reinforcement strategy

Nonsacrificial Nitrile Additive for Armoring High-Voltage LiNi0.83 Co0.07 Mn0.1 O2 Cathode with Reliable Electrode-Electrolyte Interface toward Durable Battery.

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

Surface Cobaltization for Boosted Kinetics and Excellent Stability of Nickel-rich Layered Cathodes

Modifying surface chemistry and stress concentration to enable highly stable ultrahigh-Ni cathodes

Double Conductor Coating to Improve the Structural Stability and Electrochemical Performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Material

Chemical-Mechanical Effects in Ni-Rich Cathode Materials

Synergistic Effect of B-Nb Co-modified to Achieve Crystal Structure and Interface Tuning for Ni-rich Cathode

Highly Stabilized Ni‐Rich Cathodes Enabled by Artificially Reversing Naturally‐Formed Interface

Stabilizing high-Ni cathodes with gradient surface Ti-enrichment

Nanowelding to Improve the Chemomechanical Stability of the Ni-Rich Layered Cathode Materials

In Situ Constructing Ultrastable Mechanical Integrity of Single‐Crystalline LiNi0.9Co0.05Mn0.05O2 Cathode by Interior and Exterior Decoration Strategy

Engineering a Robust Interface on Ni-Rich Cathodes via a Novel Dry Doping Process toward Advanced High-Voltage Performance