Abstract:The vapor-box is a liquid metal based design to cope with the demanding conditions of the divertor. This design relies on the recirculation of lithium by evaporation and condensation. An issue to this approach is the safety risks of Li-D/T formation and co-deposition on both the vapor-box walls - leading to possible recirculation impedance- and on the first wall leading to unacceptable tritium retention. Additively manufactured tungsten Capillary Porous Structure (CPS) samples filled with Li were exposed to high heat flux D plasmas in the linear plasma device Magnum-PSI and Li-D co-deposition was measured as a function of substrate temperature, estimated to be in the range 200-428 C and distance between 25-85 mm to the plasma beam center. The D:Li ratio was determined via in-situ ion beam diagnostics (NRA and EBS) and the spectra analyzed simultaneously to maximise the precision of the measurement. The experimental results approach close to the theoretical maximum at 40:60 D:Li ratio and the thickness of the deposited films was 0.02 - 3.2 m. For witness plate temperatures above 400 C Li films under 150 nm in thickness were deposited and show lower D:Li ratios, as low as 5:95 D:Li ratio. At these temperatures the evaporation rate from the WPs is close to the deposition rate, and the decomposition pressure for LiD becomes comparable to the operational pressure in the vessel during the discharge. SOLPS-ITER simulations were also conducted to complement the experimental data. The results were used to narrow the range of CPS surface temperature to between ^{\circ} ^{+} ^{+} \%$, which matches well with the value determined from a quartz crystal microbalance. Due to limitations in the modeling of neutral interactions with Li coated surfaces, the SOLPS-ITER modeling does not well recreate the observed Li and D deposition layers on the WPs, indicating that this aspect of the modeling in Eirene needs improvement to accurately model plasmas containing significant quantities of Li. However, SOLPS-ITER simulations should be extended to include LiD molecules and improve the accuracy of heat flux towards the target to improve the comparison with experimental data.

Deuterium loading of redeposited-like W coatings present in tokamaks by ion implantation

Helium load on W-O coatings grown by pulsed laser deposition

Deuterium retention in co-deposition with lithium in Magnum-PSI: experimental analysis and comparison with SOLPS-ITER

Surface Modification and Deuterium Retention of High Energy Rate Forging W-Y2O3exposed to Deuterium Plasma

Combination of in-situ ion beam analysis and thermal desorption spectroscopy for studying deuterium implanted in tungsten

Blistering Behavior and Deuterium Retention in Tungsten Vanadium Alloys Exposed to Deuterium Plasma in the Linear Plasma Device STEP

Characterization on deuterium retention in tungsten target using spatially resolved laser induced desorption-quadrupole mass spectroscopy

Recent Studies of Tungsten-Based Plasma-Facing Materials in the Linear Plasma Device STEP

Influence of neon seeding on the deuterium retention and surface modification of ITER-like forged tungsten

Experimental Measurement of Deuterium Concentration and Depth Profiling in Tungsten by Radio Frequency Glow Discharge Optical Emission Spectroscopy

Surface Blistering and Deuterium Retention in Chemical Vapor Deposition Tungsten Exposed to Deuterium Plasma

Influence of Nitrogen Pre-Irradiation at Different Temperatures on Surface Blistering and Deuterium Retention in Tungsten

Comparing deuterium retention in heavy ion damaged tungsten measured by glow discharge optical emission spectroscopy, nuclear reaction analysis and thermal desorption spectroscopy

Deuterium retention and thermal conductivity in ion-beam displacement-damaged tungsten

Deuterium retention in tungsten co-deposits with neon and argon inclusions

Surface Diversifying and Deuterium Retention Characteristics of Doped Graphite with SiC Coating Exposed to Plasma Discharges in EAST Tokamak

Irradiation hardening and deuterium retention behaviour of tungsten under synergistic irradiations of 3.5 MeV Fe 13+ ions and deuterium plasma

Deuterium-induced Nanostructure Formation on Tungsten Exposed to High-Flux Plasma

High erosion and re-deposition rates of tungsten in the highly collisional plasmas of Magnum-PSI

Deuterium Retention in Tungsten Films Deposited by Magnetron Sputtering

Deuterium Blistering in Tungsten and Tungsten Vanadium Alloys