Abstract:CO 2 capture and utilisation (CCU) is a promising strategy to effectively mitigate the adverse greenhouse effects caused by CO 2 emissions at an industrial scale. Through a process intensification strategy known as integrated CO 2 capture and utilisation (ICCU), CO 2 capture and catalytic CO 2 conversion can be achieved in a single process with the use of dual function materials (DFMs), which are both CO 2 sorbents and CO 2 conversion catalysts. Given the significantly different operating conditions of ICCU from conventional catalytic CO 2 hydrogenation, the catalytic mechanism of DFMs, especially during CO 2 hydrogenation, needs to be thoroughly investigated. In this study, the relationship between the nature of the Ni/carbonate interfaces and the performance of Ni-based DFMs over ICCU cycles is systematically investigated. A series of Ni/alkaline earth carbonate DFMs were synthesised with varying Ca:Mg ratios to simulate different metal-carbonate model interfaces. At 400 °C, CH 4 formation with nearly 100% CH 4 selectivity was achieved on Ni/CaCO 3 over 15 ICCU cycles. In general, Ni/CaCO 3 interfaces correspond to higher CO 2 conversion and higher CH 4 selectivity than Ni/MgCO 3 interfaces. Such trend may be attributed to the higher surface basicity of CaO and the higher thermal stability of CaCO 3 . As a consequence, the hydrogenation of the Ni/CaCO 3 interface proceed via the formate pathway, in which carbonates are consecutively converted to surface formates, methoxyl, methyl species and eventually desorb as methane. This reaction model is applicable to the hydrogenation of both surface carbonate and bulk carbonates, although the former proceeds with much faster kinetics. On the weakly alkaline Ni/MgCO 3 interface, MgCO 3 preferentially decomposes to form gaseous CO 2 , which is subsequently hydrogenated via the reverse-water-gas-shift pathway, with CO as the key reaction intermediate. Interestingly, in situ infrared spectroscopy shows similar surface significant species during the direct hydrogenation of DFMs and during the conventional catalytic hydrogenation of molecular CO 2 , suggesting that the catalytic mechanisms during the two operating regimes are highly correlated.

Upgrading CO 2 from simulated power plant flue gas via integrated CO 2 capture and dry reforming of methane using Ni-CaO

CO2 capture from H2O and O2 containing flue gas integrating with dry reforming methane using Ni-doping CaO dual functional materials

Cu Promoted Ni-Ca Dual Functional Materials for Integrated CO2 Capture and Utilization in O2-containing Flue Gas: Eliminating the Delay in the Utilization Stage

Ni-CaO Dual Function Materials Prepared by Different Synthetic Modes for Integrated CO2 Capture and Conversion

Development of dual-functional materials for integrated CO2 capture and utilization by dry reforming of CH4

Ni-functionalized Ca@Si Yolk-Shell Nanoreactors for Enhanced Integrated CO2 Capture and Dry Reforming of Methane Via Confined Catalysis

Ni/CaO-based dual-functional materials for calcium-looping CO 2 capture and dry reforming of methane: Progress and challenges

Bifunctional Ni-Ca based material for integrated CO2 capture and conversion via calcium-looping dry reforming

An investigation of the Ni/carbonate interfaces on dual function materials in integrated CO2 capture and utilisation cycles

A DFT study for in-situ CO2 utilization realized by calcium-looping dry reforming of methane based on Ni/CaCO3

Integrated CO2 capture and In-Situ methanation by efficient dual functional Li4SiO4@Ni/CeO2

Calcium-looping coupling methane partial oxidation and dry reforming process for integrated CO 2 capture and conversion: Regulable H 2 /CO molar ratio and excellent coke deposition-resistant

Integrated CO2 capture and utilization with CaO-alone for high purity syngas production

Synthetic Ni–CaO–CeO 2 dual function materials for integrated CO 2 capture and conversion via reverse water–gas shift reaction

Metal Oxide‐Doped Ni/ CaO Dual‐Function Materials for Integrated CO 2 Capture and Conversion: Performance and Mechanism

Dry reforming of methane for syngas production over attapulgite-derived MFI zeolite encapsulated bimetallic Ni-Co catalysts

Integrated carbon capture and utilization: Synergistic catalysis between highly dispersed Ni clusters and ceria oxygen vacancies

Mechanistic Study of Integrated CO2 Capture and Utilization over Cu and Al-modified Calcined Limestone with High Stability Using MFB-TGA-MS

Active Metal-Free CaO-based Dual-Function Materials for Integrated CO2 Capture and Reverse Water–gas Shift

Investigation into the coking-related key reaction steps in dry reforming of methane over NiMgO x catalyst

A Novel NiCa-based Dual-Functional Material with High Absorption Capacity and Stability for Integrated Direct Air CO2 Capture and In-Situ Methanation