Abstract:CO 2 capture and utilisation (CCU) is a promising strategy to effectively mitigate the adverse greenhouse effects caused by CO 2 emissions at an industrial scale. Through a process intensification strategy known as integrated CO 2 capture and utilisation (ICCU), CO 2 capture and catalytic CO 2 conversion can be achieved in a single process with the use of dual function materials (DFMs), which are both CO 2 sorbents and CO 2 conversion catalysts. Given the significantly different operating conditions of ICCU from conventional catalytic CO 2 hydrogenation, the catalytic mechanism of DFMs, especially during CO 2 hydrogenation, needs to be thoroughly investigated. In this study, the relationship between the nature of the Ni/carbonate interfaces and the performance of Ni-based DFMs over ICCU cycles is systematically investigated. A series of Ni/alkaline earth carbonate DFMs were synthesised with varying Ca:Mg ratios to simulate different metal-carbonate model interfaces. At 400 °C, CH 4 formation with nearly 100% CH 4 selectivity was achieved on Ni/CaCO 3 over 15 ICCU cycles. In general, Ni/CaCO 3 interfaces correspond to higher CO 2 conversion and higher CH 4 selectivity than Ni/MgCO 3 interfaces. Such trend may be attributed to the higher surface basicity of CaO and the higher thermal stability of CaCO 3 . As a consequence, the hydrogenation of the Ni/CaCO 3 interface proceed via the formate pathway, in which carbonates are consecutively converted to surface formates, methoxyl, methyl species and eventually desorb as methane. This reaction model is applicable to the hydrogenation of both surface carbonate and bulk carbonates, although the former proceeds with much faster kinetics. On the weakly alkaline Ni/MgCO 3 interface, MgCO 3 preferentially decomposes to form gaseous CO 2 , which is subsequently hydrogenated via the reverse-water-gas-shift pathway, with CO as the key reaction intermediate. Interestingly, in situ infrared spectroscopy shows similar surface significant species during the direct hydrogenation of DFMs and during the conventional catalytic hydrogenation of molecular CO 2 , suggesting that the catalytic mechanisms during the two operating regimes are highly correlated.

Ni-functionalized Ca@Si Yolk-Shell Nanoreactors for Enhanced Integrated CO2 Capture and Dry Reforming of Methane Via Confined Catalysis

Ni-CaO Dual Function Materials Prepared by Different Synthetic Modes for Integrated CO2 Capture and Conversion

Self-Confinement Created for a Uniform Ir–Ni/SiO2 Catalyst with Enhanced Performances on CO2 Reforming of Methane

CO2 capture from H2O and O2 containing flue gas integrating with dry reforming methane using Ni-doping CaO dual functional materials

Cu Promoted Ni-Ca Dual Functional Materials for Integrated CO2 Capture and Utilization in O2-containing Flue Gas: Eliminating the Delay in the Utilization Stage

Bifunctional Ni-Ca based material for integrated CO2 capture and conversion via calcium-looping dry reforming

Developing Silicalite-1 Encapsulated Ni Nanoparticles as Sintering-/Coking-Resistant Catalysts for Dry Reforming of Methane

Photoinducing Different Mechanisms on a Co-Ni Bimetallic Alloy in Catalytic Dry Reforming of Methane

Development of dual-functional materials for integrated CO2 capture and utilization by dry reforming of CH4

A Novel NiCa-based Dual-Functional Material with High Absorption Capacity and Stability for Integrated Direct Air CO2 Capture and In-Situ Methanation

Improving the Anti-Coking Ability in the Ni-M(M = Ce, Zr, Co)@SiO2 Yolk-Shell Catalysts for Dry Reforming of Methane

Synergistic promotions between CO2 capture and in-situ conversion on Ni-CaO composite catalyst

Improving the anti-coking ability in the Ni-M(M = Ce, Zr, Co)@SiO 2 yolk-shell catalysts for dry reforming of methane

Functionalization of inert silica to construct Si-O-Ni interfacial sites for stable dry reforming of methane

Integrated carbon capture and utilization: Synergistic catalysis between highly dispersed Ni clusters and ceria oxygen vacancies

Design Dual Confinement Ni@S-1@SiO2 2 Catalyst with Enhanced Carbon Resistance for Methane Dry Reforming

Upgrading CO 2 from simulated power plant flue gas via integrated CO 2 capture and dry reforming of methane using Ni-CaO

Properties of yolk–shell structured Ni@SiO 2 nanocatalyst and its catalytic performance in carbon dioxide reforming of methane to syngas

Design Dual Confinement Ni@S-1@SiO2 Catalyst with Enhanced Carbon Resistance for Methane Dry Reforming

An investigation of the Ni/carbonate interfaces on dual function materials in integrated CO2 capture and utilisation cycles

Small-sized Ni nanoparticles embedded nickel phyllosilicate as a metal-acid bifunctional zeolite catalyst for cooperatively boosting CO2-CH4 reforming