Abstract:CO 2 capture and utilisation (CCU) is a promising strategy to effectively mitigate the adverse greenhouse effects caused by CO 2 emissions at an industrial scale. Through a process intensification strategy known as integrated CO 2 capture and utilisation (ICCU), CO 2 capture and catalytic CO 2 conversion can be achieved in a single process with the use of dual function materials (DFMs), which are both CO 2 sorbents and CO 2 conversion catalysts. Given the significantly different operating conditions of ICCU from conventional catalytic CO 2 hydrogenation, the catalytic mechanism of DFMs, especially during CO 2 hydrogenation, needs to be thoroughly investigated. In this study, the relationship between the nature of the Ni/carbonate interfaces and the performance of Ni-based DFMs over ICCU cycles is systematically investigated. A series of Ni/alkaline earth carbonate DFMs were synthesised with varying Ca:Mg ratios to simulate different metal-carbonate model interfaces. At 400 °C, CH 4 formation with nearly 100% CH 4 selectivity was achieved on Ni/CaCO 3 over 15 ICCU cycles. In general, Ni/CaCO 3 interfaces correspond to higher CO 2 conversion and higher CH 4 selectivity than Ni/MgCO 3 interfaces. Such trend may be attributed to the higher surface basicity of CaO and the higher thermal stability of CaCO 3 . As a consequence, the hydrogenation of the Ni/CaCO 3 interface proceed via the formate pathway, in which carbonates are consecutively converted to surface formates, methoxyl, methyl species and eventually desorb as methane. This reaction model is applicable to the hydrogenation of both surface carbonate and bulk carbonates, although the former proceeds with much faster kinetics. On the weakly alkaline Ni/MgCO 3 interface, MgCO 3 preferentially decomposes to form gaseous CO 2 , which is subsequently hydrogenated via the reverse-water-gas-shift pathway, with CO as the key reaction intermediate. Interestingly, in situ infrared spectroscopy shows similar surface significant species during the direct hydrogenation of DFMs and during the conventional catalytic hydrogenation of molecular CO 2 , suggesting that the catalytic mechanisms during the two operating regimes are highly correlated.

Development of dual-functional materials for integrated CO2 capture and utilization by dry reforming of CH4

Ni-CaO Dual Function Materials Prepared by Different Synthetic Modes for Integrated CO2 Capture and Conversion

Cu Promoted Ni-Ca Dual Functional Materials for Integrated CO2 Capture and Utilization in O2-containing Flue Gas: Eliminating the Delay in the Utilization Stage

Tailoring the Performance of Ni-CaO Dual Function Materials for Integrated CO2 Capture and Conversion by Doping Transition Metal Oxides

Insights into Nickel-Based Dual Function Materials for CO2 Sorption and Methanation: Effect of Reduction Temperature

CO2 capture from H2O and O2 containing flue gas integrating with dry reforming methane using Ni-doping CaO dual functional materials

Metal Oxide‐Doped Ni/ CaO Dual‐Function Materials for Integrated CO 2 Capture and Conversion: Performance and Mechanism

A Novel NiCa-based Dual-Functional Material with High Absorption Capacity and Stability for Integrated Direct Air CO2 Capture and In-Situ Methanation

Integrated CO2 capture and In-Situ methanation by efficient dual functional Li4SiO4@Ni/CeO2

Synthetic Ni–CaO–CeO 2 dual function materials for integrated CO 2 capture and conversion via reverse water–gas shift reaction

Bifunctional Ni-Ca based material for integrated CO2 capture and conversion via calcium-looping dry reforming

Ni/CaO-based dual-functional materials for calcium-looping CO 2 capture and dry reforming of methane: Progress and challenges

Active Metal-Free CaO-based Dual-Function Materials for Integrated CO2 Capture and Reverse Water–gas Shift

An investigation of the Ni/carbonate interfaces on dual function materials in integrated CO2 capture and utilisation cycles

Ni-functionalized Ca@Si Yolk-Shell Nanoreactors for Enhanced Integrated CO2 Capture and Dry Reforming of Methane Via Confined Catalysis

Upgrading CO 2 from simulated power plant flue gas via integrated CO 2 capture and dry reforming of methane using Ni-CaO

Material design and prospect of dual-functional materials for integrated carbon dioxide capture and conversion

Self-Confinement Created for a Uniform Ir–Ni/SiO2 Catalyst with Enhanced Performances on CO2 Reforming of Methane

Mechanistic Study of Integrated CO2 Capture and Utilization over Cu and Al-modified Calcined Limestone with High Stability Using MFB-TGA-MS

In Situ Spectroscopic Study of CO2 Capture and Methanation over Ni-Ca Based Dual Functional Materials

Recent Progress in Integrated CO2 Capture and Conversion Process Using Dual Function Materials: A State-of-the-Art Review