Abstract:Reducing carbon emissions remains a formidable challenge under present energy demands and structures. Integrated CO2 capture and utilisation (ICCU) provides a promising pathway for directly capturing and simultaneously utilising CO2 from the diluted exhaust gas. Dry reforming of methane (DRM) can be integrated into the step of catalytic conversion of the captured CO2 with the advantages of utilising two greenhouse gases to yield valuable syngas (CO + H2). The process has great challenges of materials development for efficient performance, in particular under realistic conditions such as the presence of O2 and H2O in the flue gas. This work investigated the ICCU-DRM using simulated flue gases (10 % CO2 + 6.7 % O2 + 6.0 % H2O) in the presence of Ni-CaO dual functional materials, aiming to optimise Ni loading and metal support interaction. It is found that Ni would significantly sinter and further affect the morphologies of CaO adsorbents, resulting in poorer CO2 capture performances. More notably, the Ni was firstly oxidised during CO2 capture and subsequently went through a pre-reduction period in the DRM step. Increased Ni loading decreased the difficulty of activation; however, it derived in more severe carbon deposition. To avert the direct contact of carbon deposition and flue gas, extra carbon steam gasification was introduced, and higher Ni loading contributed to selectively yielding syngas as a by-product. The Ni10-CaO DFM optimally performed <150 s pre-reduction delay, ∼85 % CO2 conversion and ∼2 H2:CO ratio in the DRM step and ∼75 % CO selectivity in the CSG step at 650 °C. The interaction between Ni and CaO poorly contributes to the performance due to the poor reducibility and accessibility, and the Ni particle size effects only play as spectators in this integrated process.

Calcium-looping coupling methane partial oxidation and dry reforming process for integrated CO 2 capture and conversion: Regulable H 2 /CO molar ratio and excellent coke deposition-resistant

Bifunctional Ni-Ca based material for integrated CO2 capture and conversion via calcium-looping dry reforming

Ni/CaO-based dual-functional materials for calcium-looping CO 2 capture and dry reforming of methane: Progress and challenges

Two birds with one stone: MgO promoted Ni-CaO as stable and coke-resistant bifunctional materials for integrated CO 2 capture and conversion

A DFT study for in-situ CO2 utilization realized by calcium-looping dry reforming of methane based on Ni/CaCO3

Ni-CaO Dual Function Materials Prepared by Different Synthetic Modes for Integrated CO2 Capture and Conversion

Cu Promoted Ni-Ca Dual Functional Materials for Integrated CO2 Capture and Utilization in O2-containing Flue Gas: Eliminating the Delay in the Utilization Stage

CO2 capture from H2O and O2 containing flue gas integrating with dry reforming methane using Ni-doping CaO dual functional materials

Exploring the Challenges of Calcium Looping Integrated with Methane Bireforming for Enhanced Carbon Capture and Utilization

Development of dual-functional materials for integrated CO2 capture and utilization by dry reforming of CH4

Remarkable Basic-Metal Oxides Promoted Confinement Catalysts for CO2 Reforming

Highly Active La0.35Sr0.35Ba0.3Fe1-xCoxO3 Oxygen Carriers with the Anchored Nanoparticles for Chemical Looping Dry Reforming of Methane

Revolutionizing CH4-CO2 reforming: Resilient La2O3-Ni@MgAl2O4 catalyst with dual-function synergy

High-reactive and Coke-Resistant Polyhedral NiO/Fe2O3 Oxygen Carrier for Enhancing Chemical Looping CH4–CO2 Dry Reforming

Experimental investigation of integrated CO 2 capture and conversion to syngas via calcium looping coupled with dry reforming of CH 4

Achieving surface and bulk rate matching for chemical looping partial oxidation of methane by modulating oxygen transport

Investigation into the coking-related key reaction steps in dry reforming of methane over NiMgO x catalyst

A Novel NiCa-based Dual-Functional Material with High Absorption Capacity and Stability for Integrated Direct Air CO2 Capture and In-Situ Methanation

In-situ Metal Doping to Boost the Reactivity of Layered Double Hydroxide Derived Mg-Fe-Al-O Oxygen Carriers for Chemical Looping CH4 Reforming with CO2 Reduction

Upgrading CO 2 from simulated power plant flue gas via integrated CO 2 capture and dry reforming of methane using Ni-CaO

NiO/κ-CeZrO4 functional oxygen carriers with Niδ+ and oxygen vacancy synergy for chemical looping partial oxidation reforming of methane