Abstract:Background: The insatiable need for low-power and high-performance integrated circuit (IC) results in the development of alternative options for metal oxide semiconductor field effect transistor (MOSFET) in the ultra-nanoscale regime. The practical challenge of the device scaling limits the use of MOSFET for future technology nodes. ICs are equipped with billions of transistors whose size must be scaled while increasing performance. As the size of the transistor shrinks for the new technology node, the control of the gate over the channel also reduces, leading to sub-threshold leakage. The non-planar technology is the potential methodology to design the ICs for the future technology nodes. The fin-shaped field effect transistor (FinFET) is the most valuable non-planar technology. High sub-threshold slope, better short channel effect (SCE) control, high current drive strength, low dopant-prompted variations, and decreased power dissipation are the prominent features of FinFET technology. Objective: FinFET is an advanced version of MOSFET in terms of geometrical structure. Therefore, in this review paper, the different geometrical structures, working operations, design challenges, future aspects, and the different configurations of FinFETs are presented. The performance of the different configurations of a 1-bit full adder is evaluated and compared. Methods: An overview of FinFET evolution from the planar MOSFET, along with its architecture supported by the requisite equations, is presented in the paper. Besides this, it also gives an insight into the circuit simulation using the FinFETs for the process voltage temperature (PVT) variations, width quantization, design challenges, and the future of FinFETs. A comparative study of FinFET-based 1-bit full adder using various techniques is done to compute and compare the leakage power, delay, and power delay product (PDP). Results: The full adders using FinFETs show less leakage power and PDP. The AND-OR logicbased hybrid full adder using FinFETs shows the least energy consumption per switching. Fin- FET-based gate diffusion input adder shows a 74 % reduction in dynamic power compared to the full adder using MOSFET technology. The low power FinFET-based full adder shows a 54.16 % reduction in leakage power compared to the MOSFET-based full adder. The results signify the effect of multi-gates in curbing the leakage power dissipation. Conclusion: MOSFET faces the practical challenge of device scaling and SCEs at lower technology nodes. It initiates the multi-gate technology for future system generation. FinFET has the capability to design low-power and high-performance circuits in an ultra-nanoscale regime. The geometrical structure of FinFET plays a key role to improve the performance metrics in an ultrananoscale regime.

Design and Simulation of FinFET based digital circuits for low power applications

Design and Analysis of 18 nm FinFET Device with High Density Meshing for High-speed and Ultra-low Power Applications

Review of the Nanoscale FinFET Device for the Applications in Nano-regime

Design and Analysis of Gate Stack Silicon-on-Insulator Nanosheet FET for Low Power Applications

A Transistor-Level DFF Based on FinFET Technology for Low Power Integrated Circuits

Performance analysis of FinFET based inverter, NAND and NOR circuits at 10 NM,7 NM and 5 NM node technologies

Design of Low-Power High-Performance FinFET Standard Cells

Design Considerations into Circuit Applications for Structurally Optimised FinFET

Speed and Scalability of Ambipolar Deep-Subthreshold TFTs for Ultralow-Power Printed Electronics

A low operating power FinFET transistor module featuring scaled gate stack and strain engineering for 32/28nm SoC technology

Review of FinFET Devices and Perspective on Circuit Design Challenges

Low-power CMOS digital design

Low Power High Performance FinFET Standard Cells Based on Mixed Back Biasing Technology.

Device Circuit Co Design Of Fefet Based Logic For Low Voltage Processors

CMOS Low Power Cell Library For Digital Design

Research On Circuit-Level Design Of High Performance And Low Power Fpga Interconnect Circuits In 28nm Process

Ultra-Low-Power and Performance-Improved Logic Circuit Using Hybrid TFET-MOSFET Standard Cells Topologies and Optimized Digital Front-End Process

Design and Power Dissipation Consideration of PFAL CMOS V/S Conventional CMOS Based 2:1 Multiplexer and Full Adder

Design of D flip-flops with low power-delay product based on FinFET

Low power-area designs of 1bit full adder in cadence virtuoso platform

Low Power Adiabatic Logic Based on FinFETs