Abstract:In many alloy systems, the segregation and strengthening of the solute atoms are caused by mechanical and chemical contributions. To uncover the origins of segregation behaviors and strengthening behaviors of the solute atoms Cd, Si, Sc and Zr at (001)α-Al//(001)θ' and (010)α-Al//(010)θ' interfaces, first-principles calculations were conducted. Results show that the chemical contribution primarily dominates the oscillatory segregation behaviors of Cd, Si, Sc and Zr on the Al matrix side. The oscillatory segregation behaviors of Cd, Si, Sc and Zr on the θ' side are mainly governed by both chemical and mechanical contributions. The segregation tendency of Cd at the (001)α-Al//(001)θ' interface (or (010)α-Al//(010)θ' interface) throughout the platelets is small (or strong) because the charge accumulation between Cd and the host atoms is weak (or significant). The segregation trend of Sc (or Zr) on the Al matrix side at the (001)α-Al//(001)θ' and (010)α-Al//(010)θ' interfaces is strong, which is attributed to significant charge accumulation between Sc (or Zr) and the host atoms. Si exhibits a favorable segregation tendency on the θ' side at both the (001)α-Al//(001)θ' and (010)α-Al//(010)θ' interfaces, which is ascribed to significant charge accumulation between Si and the host atoms. With the increase of Si, Sc and Zr coverage, the segregation tendencies of Si, Sc and Zr enhance. The segregation tendency of Cd decreases with the increase of Cd coverage. The first-principles tensile test for the interface was conducted. The work of dislocation emission was computed. Results show that the strengthening effects of solute atoms on the interface are primarily dominated by the chemical contribution. Sc (or Zr) segregation leads to an increase in the strength of the interface, which is majorly attributed to a strong electronic interaction between Sc (or Zr) and the host atoms. Cd segregation causes a weakening effect on the interface because of the weak electronic interaction between Cd and the host atoms. The ductility of the (001)α-Al//(001)θ' interface with the Sc (or Zr) is more significant than that with the Cd (or Si). This work provides a strategy for improving the mechanical properties of the Al-Cu alloys.

Effect of Elements Segregation at α‐Fe/Al2O3 Interface on Microareas Corrosion Activity around Al2O3 Inclusions

Segregation of alloying elements at the bcc-Fe/B2–NiAl interface and the corresponding effects on the interfacial energy

First‐principles Study of Surface Segregation in Bimetallic Ni3M (M = Mo, Co, Fe) Alloys with Chemisorbed Atomic Oxygen

The first-principles study of interfacial bonding strength and segregation behavior of alloyed elements at the η(MgZn 2 )/Al interface

High-throughput first-principles study on the effect of Ni segregation on the formation of Cr-depleted zone and corrosion resistance of S32205 duplex stainless steels

Effects of Cu Addition on the Microstructure and Properties of the Al–Mn–Fe–Si Alloy

Contributions of Al and Ni segregation to the interfacial cohesion of Cu-rich precipitates in ferritic steels

The Effects of Alloying Elements Cr, Al, and Si on Oxidation Behaviors of Ni-Based Superalloys

The origins of segregation behaviors of solute atoms and their effect on the strength of α-Al//θ'-Al2Cu interfaces in Al-Cu alloys

Segregation of S precipitates at T/Al interfaces and relevant effects on localized corrosion mechanisms in Al-Cu-Mg alloy

Effects of active elements on adhesion of the Al2O3/Fe interface: A first principles calculation

Probing the Effect of Alloying Elements on the Interfacial Segregation Behavior and Electronic Properties of Mg/Ti Interface via First-Principles Calculations

The segregation behavior of elements at the Ti/TiFe coherent interface: First-principles calculation

Segregation Behavior of Alloying Elements in Different Oriented Single Crystal Nickel Based Superalloys

First-Principles Study on the Cu/Fe Interface Properties of Ternary Cu-Fe-X Alloys

Effect of Al content on the microstructure and properties of CoCrCuFeNiMoAlx high entropy alloy

Effects of deoxidation methods on the inclusion characteristics and corrosion behaviour of high-strength low-alloy steels in marine environments

Effect of solutes segregation in a binary TiAl alloy: A first-principles calculation method

Effect of grain structures and precipitation characteristics on the corrosion behaviour of Sc-containing Al-Cu-Li alloy

Effects of phase selection and microsegregation on corrosion behaviors of Ti-Al-Mo alloys

Comparative study of the reactive elements effects on oxidation behavior of a Ni-based superalloy