Abstract:The interface atomic arrangement and solute element segregation behavior at the Al/TiC interface in TiC/2219 composite material were systematically studied using first-principles calculations. The computational results demonstrate that the (100) Al/TiC (C-site) interface is identified as the theoretically optimal binding interface due to its minimal mismatch, lowest interface energy, and maximum adhesion energy. Among various major and minor solute elements in the 2219 alloy, Fe and Zn exhibit a tendency to spontaneously segregate towards the interface, while Cu, Mn, Si, Mg, Zr, V, and Ti require external energy input to facilitate segregation towards the interface. First-principles tensile experiments reveal that Mg, Zn, and Cu decrease the interface strength, whereas Mn, Fe, Si, Zr, V, and Ti enhance the interface strength. Notably, Mn segregation to the interface maximally enhances the interface bonding strength. Further electronic structure analysis indicates that the weakening of interface bonding by Mg, Zn, and Cu is attributed to the reduction in interface charge density and weakening of interface chemical bonds upon their segregation. Conversely, segregation of Mn, Fe, Si, Zr, V, and Ti results in increased interface charge density, and projection of density of states reveals that Mn atoms form covalent bonds between interface atoms, significantly enhancing the interface atomic bonds and strength. This theoretical analysis discusses the influence of various major and minor solute elements in the 2219 alloy on the Al/TiC interface, providing theoretical insights for interface modification and further enhancement of properties in 2219/TiC composite materials.

Effects of active elements on adhesion of the Al2O3/Fe interface: A first principles calculation

Effect of Substrate Characteristics on Interdiffusion Coefficients of Ni and Al Atoms in Β-Nial Phase of Aluminide Coatings

Strengthening mechanism of Si, V and Ti atoms to the Ag/AlN interface: a study from first-principles calculations

First-principles calculations of the effects of the interface microstructure on the wettability of a Cu–Ti/AlN system

Interfacial Stoichiometry and Adhesion at Metal/α‐Al2O3 Interfaces

Chemical bonding, thermodynamic stability and mechanical strength of Ni3Ti/α-Al2O3 interfaces by first-principles study

A Hierarchical High-Throughput First Principles Investigation on the Adhesion Work, Interfacial Energy and Tensile Strength of NiTi2 (100)/Α-Al2o3 (0001) Interfaces

Investigation on the effect of alloying elements on the Ti 2 AlC/TiAl interfacial properties: First-principles prediction and experimental verification

Exploring failure mode and enhancement mechanism of doped rare-earth elements iron-based/alumina-ceramic interface

Theoretical Study on the Effects of Alloying Elements on Oxygen-Adsorption Properties of the Ti 2 AlNb Surface

Understanding alloying behaviors of Sc, Ni and Zn additions on Al/TiB2 interfaces based on interfacial characteristics and solute properties

Insights into the adsorption and interfacial products improving the wetting of the Ag-Ti/graphite and Cu-Ti/graphite systems: A first-principles calculation

Interface properties of Ti3SiC2/Al2O3 ceramics: Combined experiments and first-principles calculations

Effect on Wetting Properties of the Al-Ti System by the Addition of Different Alloying Elements

The effect of multi-arc ion plating NiCr coating on interface characterization of ZrO2–Al2O3 ceramics reinforced iron-based composites

First-principles investigation of interface atomic arrangement and segregation behavior of solute elements in Al/TiC interface in TiC/2219 composites

Influence of interfacial configuration on bonding strength and wettability between CuNiTi active filler metal and AlN ceramic

Effect of Fe on the formation of NiAl intermetallic light beam surfacing layer and its microstructure

Effects of Slurry Composition and Interfacial Adhesion of Monolithic Coatings on FeCrAl Honeycombs

Effects of RE (Nd, Ce, Y, La) on TiC(100)/Fe(110) interface based on first-principles calculations

First-Principles Investigations of the Structural, Anisotropic Mechanical, Thermodynamic and Electronic Properties of the AlNi2Ti Compound