Abstract:The pressure dependence behaviors of structural and mechanical properties as well as the effect of temperature on thermodynamic properties of Ni-Al ordered intermetallic compounds (i.e. Ni(3)A1, Ni5Al3, NiAl, Ni2Al3 and NiAl3) are investigated in details by implementing first-principles calculations. The calculated lattice parameters, bulk modulus and its pressure derivative are well in agreement with available experimental and theoretical values at zero pressure. All the compounds are mechanically stable with pressure going up to 50 GPa, and the volume change resistance of nickel aluminum alloys can be improved by increasing pressure and Ni concentration. The shear deformation resistance, elastic stiffness and microhardness of nickel aluminum alloys can be strengthened by increasing the content of Ni5Al3 and Ni2Al3, and pressure can also enhance these properties of Ni5Al3, NiAl and Ni2Al3. The ductility of Ni3Al, Ni5Al3 and NiAl can be improved by increasing pressure, while brittle nature turns into ductile nature in 20-30 GPa and 10-20 GPa for Ni2Al3 and NiAl3, respectively. Furthermore, the elastic anisotropy of Ni3Al, Ni5A13, Ni(2)Al3 and NiAl3 enhances with pressure, while NiAl shows few change with pressure increasing. In addition, Ni3Al is the most sensitive to pressure change among considered compounds. Finally, the Debye temperature, linear thermal expansion coefficient and heat capacity of these compounds are calculated using the quasi-harmonic Debye model in pressure ranging from 0 to 50 GPa and temperature ranging from 0 to 1200 K to elucidate the relationships between thermodynamic parameters and temperature under various pressure. The results are helpful insights into the study of nickel aluminum alloys. (C) 2017 Elsevier Ltd. All rights reserved.

First-Principles Investigations of the Structural, Anisotropic Mechanical, Thermodynamic and Electronic Properties of the AlNi2Ti Compound

Mechanical and Thermodynamic Properties of Intermetallic Compounds in the Ni–Ti System

The Electronic, Mechanical, Anisotropic and Thermodynamic Properties of ZrAlNi, ZrAlNi2, ZrAl5Ni2 and Zr6Al2Ni Ternary Intermetallics

The Mechanical Properties of Intermetallic Ni50−xTi50Alx Alloys (X=6,7,8,9)

Effect of Zr, Hf, and Sn Additives on Elastic Properties of Α2-Ti3al Phase by First-Principles Calculations

First-principles Study of Ni-Al Intermetallic Compounds under Various Temperature and Pressure

Structural, Elastic, Anisotropic, Electronic, Thermal Properties and Tensile Strength of AlTM2Ti (TM = Ni, Fe, Cu, Co, Au) Studied by First-Principles Calculations

The Mechanical and Thermodynamic Properties of Heusler Compounds Ni2xal (X = Sc, Ti, V) under Pressure and Temperature: A First-Principles Study

Chemical bonding, thermodynamic stability and mechanical strength of Ni3Ti/α-Al2O3 interfaces by first-principles study

Mechanical Properties of Ti2AlNb and Ti2AlZr Intermetallics: A First Principles Study

Study of the Mechanical and Thermodynamic Properties on NiAl and Ni3Al

First-principles calculation on the structural, elastic and thermodynamic properties of Ti-Al intermetallics

Investigation on the electronic structures, elastic and thermodynamic properties of TiNi, Ti 2 Ni and TiNi 3 intermetallic compound

A Hierarchical High-Throughput First Principles Investigation on the Adhesion Work, Interfacial Energy and Tensile Strength of NiTi2 (100)/Α-Al2o3 (0001) Interfaces

First-principles Calculation on the Adhesion Strength, Fracture Mechanism, Interfacial Bonding of the NiTi (111)//Α-Al2o3 (0001) Interfaces

Tensile Strength and Fracture Property of Ni(111)/α-Al2O3(0001) Interface with Yttrium Doping Based on First-Principles

Theoretical Study of the Effects of Alloying Elements on TiO2/Ti2AlNb Interface Adhesion Properties.

First-principles studies of Al–Ni intermetallic compounds

Investigation on the lattice vibration, mechanical properties, stress-strain behavior and electronic properties of FeTiSi, CoTiSi and NiTiSi intermetallics from a first-principles calculations

Ni X Cr ( X = 2 and 3): the Top Choice for Enhancing Bonding Performance of ZTA–Fe Interfaces Demonstrated by First Principles Calculations

Achieving the Superior Abrasive Wear Resistance in ZTAP/Fe Composites from the Theoretical Calculations Guided Designing of Metallurgical Interface Transition Layer