Abstract:Abstract In this paper, we propose a thermal wind speed sensor Verilog-A model with thermal-fluid-electric hybrid characteristics. Because the structure of the thermal wind sensor and the interface circuit chip are designed separately, which cannot effectively carry out MEMS-IC (integrated circuit) co-simulation, the overall performance of the sensor and interface circuit chip is prone to large deviation. At the same time, the separation of MEMS structure and IC design process leads to long product development cycle and high cost. This paper proposes an improved simulation model by analyzing the behavior characteristics of the thermal wind speed sensor. The simulation model consists of 11 thermistors, 3 capacitors, a voltage-controlled voltage source, and a voltage-controlled current source. The Taylor series expansion of the differential equation of heat conduction is carried out, and then the thermistor and capacitor networks are established according to the corresponding relationship between the thermal parameters and the electrical parameters, including the thermal conduction unit, the convection unit and the heat capacity in the chip. The model fully considers the effects of various physical effects and parasitic effects, and is implemented using the hardware description language Verilog-A. The sensor and interface circuit can be simulated simultaneously to optimize the circuit design. It is beneficial to the integration of sensors and interface circuit, reducing the number of tape-outs, increasing the success rate, and reducing costs. The consistency between the simulation results and the experimental curves verified the correctness of the macro model. The behavior characteristics of constant power (CP) and constant temperature heating were described. In CP mode, the output voltage error is less than ± 6.5%, the chip temperature error is less than 4.0%. The presented modeling approach can be the basis for the development of complete MEMS-IC design technology library of thermal wind speed sensor, aiming at optimum designs of integrated thermal wind speed sensor.

A Surrogate Model for the Rapid Evaluation of Electromagnetic-Thermal Effects under Humid Air Conditions

Electromagnetic-Circuital-Thermal Co-Simulation for Integrated Circuits and Microwave Applications

Electromagnetic-Circuital-Thermal Multiphysics Simulation Method: A Review

Parallel Simulation of Electromagnetic and Thermal Characteristic in RF Component

Parallel Multiphysics Simulation for Characterizing Performance Degradation of RF Components

An Electro-Thermal Analysis of Lateral Double-diffused MOSFET(LDMOS) Using FEM

Hybrid Physical Field Simulation: Transient Electro-Thermo-Mechanical Responses Of Interwafer Interconnects Under The Impact Of An Emp

Thermal-Fluid Co-Simulation and Modelling of IGBT with Thermal Resistance Network

Electrical-Thermal Co-Simulation For Through Silicon Via And Active Tier In 3-D Ic

Transient Electromagnetic–Thermal Co-Simulation of Microwave/RF Integrated Circuits by the HIE-FDTD Method

Thermal Analysis on Active Heat Dissipation Design with Embedded Flow Channels for Flexible Electronic Devices

A Full Chip Scale Numerical Simulation Method for Thermal Management of 3D IC

A Cross-Scale Electrothermal Co-Simulation Approach for Power MOSFETs at Device–Package–Heatsink–Board Levels

Analytical Multistage Thermal Model for FEOL Reliability Considering Self-and Mutual-Heating

Unified Self-Heating Effect Model for Advanced Digital and Analog Technology and Thermal-Aware Lifetime Prediction Methodology

An efficient macro model for CMOS-MEMS thermal wind speed sensor

A Complex Integrated Circuit Structure Transformation, Modeling and Simulation Method

Efficient Transient Thermal Analysis of Chiplet Heterogeneous Integration

Influences of hygrothermal conditions and structure parameters on moisture diffusion behavior in a system‐in‐package module by moisture-thermal-mechanical-coupled finite element modeling

Surrogate Model-Based Heat Sink Design for Energy Storage Converters

Coupled Finite Element-Finite Volume Multi-Physics Analysis of MEMS Electrothermal Actuators