Abstract:Precipitation and growth of intermetallic phases during thermal processing play an important role in the formation and evolution of heterogeneous microstructure of Ti-Al intermetallic based alloys, which have not been adequately understood. Herein, we study the nucleation and growth behaviors of Ti-Al inter-metallic compounds in Ti/TiAl3 diffusion couple based on high temperature annealing. We combine scan-ning electron microscopy (SEM), transmission electron microscopy (TEM) and electron back-scatter diffraction (EBSD) to analyze the microstructure and crystallization behavior of newly-formed intermetallic phases. The experimental results showed that phase transformations of alpha-Ti-, Ti3Al-, TiAl-, TiAl2 and TiAl3-, Ti2Al5-, TiAl2 occurred orderly during annealing at temperatures from 950 degrees C to 1150 degrees C. Intermetallic compounds containing Ti3Al, TiAl, TiAl2 and Ti2Al5 were formed at Ti/TiAl3 interface and comprised four distinct single-phase layers. The newly-precipitated intermetallic grains usually presented certain crystallographic orientation relationships with the adjacent phases. Growth kinetics analysis in-dicated that the growth of intermetallic layers was governed by volume diffusion and grain boundary diffusion, respectively, during annealing at 950 degrees C and 1050 degrees C. Both interfacial reaction and volume dif-fusion contributed to the growth of intermetallic layers at 1150 degrees C. Besides, the competitive growth between different intermetallic phases was revealed. To provide more guidance for the design of high-performance Ti-Al intermetallic based alloys, the hardness and elastic modulus of the above intermetallic compounds were determined preliminarily in the current work. (c) 2023 Elsevier B.V. All rights reserved.

Ti3AlC2 single crystal growth via controlling horizontal temperature gradient

Synthesis and Reaction Path of Ti‐Al‐C MAX Phase by Reaction with Ti‐Al Intermetallic Compounds and TiC

The synthesis of high purity Ti3AlC2 MAX phase via molten salt method

Synthesis of MAX Phases in the Ti2AlC–V2AlC System as Precursors of Heterometallic MXenes Ti2 – xVxC

(Cr2/3Ti1/3)3AlC2 and (Cr5/8Ti3/8)4AlC3: New MAX‐phase Compounds in Ti–Cr–Al–C System

Pressureless manufacturing of high purity Ti3AlC2 MAX phase material: Synthesis and characterisation

Insights into the Mechanical Properties and Thermal Transport of Ti3(Al1-xAx)C2 Solid Solutions: A Comprehensive Theoretical Study Combined with Experiment

Preparation and performance of MAX phase Ti3AlC2 by in-situ reaction of Ti-Al-C system

Ti 5 Al 2 C 3: A new ternary carbide belonging to MAX phases in the Ti - Al - C system

Synthesis of Ti3alc2 Max Phase Under Vacuum, its Structural Characterisation and Using for Ti3c2tx Mxene Preparation

Orderly Nucleation and Competitive Growth Behaviors of Ti-Al Intermetallic Compounds in Ti/TiAl3 Diffusion Couple under High Temperature

Maximizing the mechanical performance of Ti3AlC2-based MAX phases with aid of machine learning

The Elusive member of the Ti-Al-C MAX family- Ti4AlC3

Manufacturing of High Purity Cr2AlC MAX Phase Material and Its Characterization

Yttrium incorporation in Cr2AlC: On the metastable phase formation and decomposition of (Cr,Y)2AlC MAX phase thin films

Synthesis of low-cost Ti3AlC2-Ti2AlC dual MAX phase with high-electrical conductivity using economical raw materials and novel compositions

Synthesis of glucose‐derived MAX phases and investigation on the phase evolution behavior

Enhanced yield synthesis of bulk dense (M2/3Y1/3)2AlC (M = Cr, W, Mo) in-plane chemically ordered quaternary atomically laminated i-MAX phases and oxidation of (Cr2/3Y1/3)2AlC and (Mo2/3Y1/3)2AlC

TiC phase in Ti alloys at different temperatures

Porous Ti3AlC2 MAX phase enables efficient synthesis of Ti3C2Tx MXene

Structural, Morphological and Elemental Analysis of Selectively Etched and Exfoliated Ti3AlC2 MAX Phase