Abstract:Recent studies have shown that the thermal emission from the cathode plays a crucial role in the basic research on microarc discharge. In this work, a 1-D implicit particle-in-cell coupled with the Monte Carlo collision (PIC-MCC) method is adopted to simulate thermal emission-driven microarc discharge at atmospheric pressure. Two thermal emission models-thermionic emission (TE) model and thermofield emission (TFE) model-are applied to contrast and analyze the particle transport phenomena of thermal microplasma. Considering that the local electric field near the cathode affects the current densities and ionization can create sufficient space charge to modify the electric field, different current densities at the cathode and their contribution to the total current densities are evaluated under various conditions, including cathode temperatures ( T C = 2500 similar to 3500 K), applied voltages ( U = 1 similar to 30 V), and gap sizes ( d = 10 similar to 100 mu m). The electric field, maximum number density, and spatially averaged temperature of charged particles are also examined to study the interaction between thermal emission and discharge physics. Furthermore, the effects of secondary electron emission are analyzed to accurately predict electron emission in the microarc discharge. The results indicate the difference between thermal microplasma generated by TE and TFE becomes more pronounced as the gap size decreases, the cathode temperature increases, and the applied voltage increases due to the enhanced field emission (FE). In addition, gas breakdown occurs at a relatively lower voltage of 17 V for the two emission models because of the ion-enhancement effect. There exists a maximum at d = 30 mu m in current density at the cathode due to the difference between collision mean free path of electron and gap sizes. Besides, the secondary electron emission becomes more pronounced at higher cathode temperatures and... larger secondary electron emission coefficients.

Reliable potential and spatial size of virtual cathode obtained by an emissive probe with accurate filament temperature in a vacuum

Investigation of virtual cathode generated by a tungsten emissive probe in a vacuum

Analytical Calculation of the Measuring Error of an Electromagnetic Velocity Probe Caused by a Side Channel Wall

Experimental study of excitation efficiency distribution in low-voltage-driven thin film electroluminescent devices

Comparative studies of cold/hot probe techniques for accurate plasma measurements

Experimental Investigation of Sheath Effects on I–V Traces of Strongly Electron Emitting Probes

A Devices for Measuring Low Temperature of Filament in Ion Source of VG 354 Thermal Ionization Mass Spectrometer and Its Application

Investigation on Filament Temperature Characteristic for Vacuum Fluorescent Display

Spatiotemporal Evolution of Excitation Temperature of Vacuum Arcs by Tomography

A Distributed Carbon Cathodic Vacuum Arc

&Lt;title>theoretical Studies of Vircator</title>

Numerical Simulation of Kinetic Characteristics of Thermal Emission-Driven Argon Microarc Discharge at Atmospheric Pressure

Experimental Study on Dynamic Characteristics of Charged Particles in Vacuum Arc

Dynamic measuring method of filament by single-pointed source projection

Correlation Between Fluctuating Electron Temperature and Fluctuating Space-Potential Challenges the Probe Determination of Turbulent Electric Field Spectrum

A study on surface-temperature measurement by means of a vacuum-arc cathode under different current conditions

Will shifted and truncated Maxwellian EVDF near the wall exhibit different electron currents?

Study on electro-thermal properties of quartz-lamp element for the thermal-structural test

The Relationship Between Filament Resistivity and Filament Temperature for Vacuum Fluorescent Display

Three-dimensional Reconstruction of the Excitation Temperature of Copper Atoms in Vacuum Arcs

Accurate space potential measurements with emissive probe in high pressure plasma and neutral gas