Abstract:This paper assessed the growth of CVD composite coatings on three kinds of cermets and the subsequent high-temperature frictional properties. The carbon to nitrogen ratios (C: N) of Ti(C1-x, Nx) powders added to these three cermets were 5:5,7:3 and 10:0, respectively. It was prepared by powder metallurgy. The TiN/α-Al2O3/Ti(C, N)/TiN multilayer coatings were deposited on different Ti(C, N)-based cermets. The results showed that the crystallinity of the composite coating was affected by the contents of nitrogen content. The inner layer TiN coating exhibited a nano-columnar crystal structure, which detected (111) and (200) orientation texture by XRD. The α-Al2O3 coating and Ti(C, N) coating of the three specimens were coarse columnar crystal structures. The variation in the nitrogen content led to the different performances of the coating. Meanwhile, The CVD coating with a C/N ratio of 7:3 had the best comprehensive properties, because the substrate had similar grain-forming directions and more shape nucleation points. The Electron Backscattered Diffraction (EDSB)、Scanning Electron Microscope (SEM) and Energy Dispersive Spectrometer (EDS) were used to further analyze the microstructure of the samples. The Coating Al2O3 displayed excellent mud (100) value, which indicated that the preferred texture (100) existed and improved the performance of the Al2O3 coating. The adhesion strength of the composite coating on Ti(C0.7, N0.3)-based cermets is the highest. The high-temperature friction wear of the coating was further investigated. Group Y2, which expressed the sample of Ti(C0.7, N0.3)-based cermets CVD coating, demonstrated the lowest wear rate. All control groups’ wear mechanisms included abrasive wear, diffusion wear, and oxidation wear.

Influence of C2H2/N2 flow ratio on the microstructure, mechanical properties, and electrochemical behavior of TiCN composite coatings

Effect of Nitrogen Protective Atmosphere on Microstructure and High Temperature Erosion Property of TiAl3 and Cr3C2 Composite Coatings

Influence of Carbon Contents on the Structure and Tribocorrosion Properties of Tisicn Coatings on Ti6al4v

Influence on (Ni-P) Electroless Composite Plating with Carbon Nanotubes

SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES

Effect of nitrogen protective atmosphere on microstructure and property of nanocomposite coating

Influence of nitridation on the microstructure and corrosion behavior of reactive plasma sprayed TiCN coatings

Influence of Nitrogen Partial Pressure on Structure, Mechanical and Tribological Properties of TaCN Coatings

Preparation and Tribological Properties of the Carbon Nanotubes–ni–p Composite Coating

Influence of the Nitrogen Flux Ratio on the Structural, Morphological and Tribological Properties of TiN Coatings

Influence of Ti3C2Tx Addition on the Corrosion Behaviour and Tribological Properties of Electrodeposited Ni-W-Ti3C2Tx Nanocomposite Coatings

Microstructure, mechanical and tribological properties of TiCN nanocomposite films deposited by DC magnetron sputtering

Effect of carbon nanotube content and annealing temperature on corrosion performance of carbon nanotube/Ni composite layer

Microstructure, mechanical properties, and corrosion resistance of TiSiN coating prepared by FCVA technique with different N 2 flow rates

EFFECT OF C2H2 FLOW RATE ON THE DEPOSITION OF TI-TIC-TIC/DLC GRADIENT NANO-COMPOSITE FILM ON NITI ALLOY

Study on the growth and wear characters of CVD coating deposited on Ti(C, N)-based cermets with adding different C/N ratios of Ti(C, N) powders

Effect of SiC and TiC content on microstructure and wear behavior of Ni-based composite coating manufactured by laser cladding on Ti-6Al-4V

Investigations on microstructure, mechanical and tribological properties of TiN coatings deposited on three different tool materials

Effect of Chromium Carbide Addition on the Microstructures and Properties in Dual Carbide Phases Reinforced Ni-Based Composite Coatings by Plasma Cladding

Investigation of Preparation and Properties of TiCN Coatings by Reactive Plasma Spraying

Microstructure and oxidation behavior of CrCN/TiSiCN nano-multilayer coatings on Zircaloy in high-temperature steam