Abstract:Herein, a series of alumina supports were prepared by rehydration-dehydration of the traditional gamma-Al2O3 under different hydrothermal temperatures. After loading CoMo species, it was found the selectivity factor of corresponding CoMo/Al2O3 catalysts was improved greatly from 1.21 to 2.51 with the increased hydrothermal temperature of alumina supports in the hydrodesulfurization (HDS) of a model fluid catalytic cracking (FCC) naphtha. The improved HDS selectivity is attributed to the weakened metal-support interaction and lowered dispersion of MoS2 particles, resulting in catalysts with larger edge-to-corner ratios of CoMoS slabs ((f(e)/f(c))(CoMo)). Besides, the recombination mercaptans formed by reaction of produced H2S and olefins were found as a big challenge to reach a high HDS conversion (S < 10 ppm) when only using the selective HDS catalyst (one-unit process). Therefore, a two-unit process has been developed by using a selective HDS catalyst to remove the most of the refractory sulfur compounds firstly, after which using another mercaptan-removing catalyst to deal with the recombination mercaptans specially. The catalytic results show that the two-unit process has a smaller olefin loss (4.38 v%) than that of one-unit process (7.08 v%) when reducing the sulfur concentration of a heavy FCC fraction to less than 10 ppm, thus resulting in a 0.7 unit less of the research octane number loss. The present work shows that high HDS conversion and low olefin hydrogenation conversion in selective HDS of FCC gasoline can be achieved through optimization design of both the selective HDS catalyst and the whole technology.

Hydrodesulfurization of Gas Condensate containing Di-Sulfide Oil: Catalyst synthesis and evaluation

Hydrodesulfurazation Performance of Meso-microporous Molecular Sieve With Different Loading

Mesoporous Molecular Sieve MCM-41 Supported Co–Mo Catalyst for Hydrodesulfurization of Petroleum Resids

MCM-41-supported Co-Mo Catalysts for Deep Hydrodesulfurization of Light Cycle Oil

Highly Active CoMoS/Al2O3 Catalysts Ex Situ Presulfided with Ammonium Sulfide for Selective Hydrodesulfurization of Fluid Catalytic Cracking Gasoline

Upgrading Siberian (russia) Crude Oil by Hydrodesulfurization in a Slurry Reactor: A Kinetic Study

Selective Hydrodesulfurization of Gasoline on Co/MoS 2±x Catalyst: Effect of Sulfur Defects in MoS 2±X

Mesoporous Molecular Sieve MCM-41 Supported Co–Mo Catalyst for Hydrodesulfurization of Dibenzothiophene in Distillate Fuels

Progress of Catalysts for Deep Hydrodesulfurization of Fuels

Optimizing Both the CoMo/Al2O3 Catalyst and the Technology for Selectivity Enhancement in the Hydrodesulfurization of FCC Gasoline

Highly Selective Hydrodesulfurization of Gasoline on Unsupported Co-Mo Sulfide Catalysts: Effect of MoS2 Morphology

Effect of sulfiding conditions on the hydrodesulfurization performance of the ex-situ presulfided CoMoS/γ-Al2O3 catalysts

Tailoring the Structure of Co-Mo/mesoporous Γ-Al2o3 Catalysts by Adding Multi-Hydroxyl Compound: A 3000 Kt/a Industrial-Scale Diesel Ultra-Deep Hydrodesulfurization Study

Mesoporous Carbon Supported Co-Mo and Ni-Mo Catalysts for Hydrodesulfurization

Mesoporous Zeolite-Supported Co-Mo Catalyst for Hydrodesulfurization of Petroleum Resids

Preparation, Characterization, and Hydrodesulfurization Properties of Binary Transition-Metal Sulfide Catalysts

Hydrodesulfurization of Dibenzothiophene over Ni-Mo-W Sulfide Catalysts Supported on Sol-Gel Al2O3-CeO2

Optimizing hydrodesulfurization of naphtha using NiMo/graphene catalyst

Synergy effect of boron and cobalt in B2O3-SBA-15-(Co)Mo catalyst for efficient hydrodesulfurization of liquid fuels

Electronic structure regulation of CoMoS catalysts by N, P co-doped carbon modification for effective hydrodesulfurization

Essential Role of Promoter Co on the MoS 2 Catalyst in Selective Hydrodesulfurization of FCC Gasoline