Abstract:The electrical properties of the active precursor ions play an important role in the microstructure of the hydrodesulfurization (HDS) catalyst. Herein, this study first presents a simple strategy to adjust the charge of Mo-based nanoparticles (Mo-NPs) by changing the content of the organic complexing agent dodecyltrimethylammonium bromide (DTAB) and then investigates the effects of Mo-NPs with different charges on HDS catalysts. The results show that the zeta (zeta) potential of the Mo-NPs mutates from negative to positive with the DTA+/Mo molar ratio increasing to 4/7. Compared with conventional electronegative Mo precursors, the electropositive Mo-NPs could eliminate the electrostatic difference with the promoter nickel ions (Ni2+); thus, the Mo-NPs and Ni2+ could synchronously diffuse and co-load into the electropositive pore of gamma-Al2O3 by hydrothermal deposition, resulting in a more uniform distribution of active species (standard deviation of slab length = 0.51 vs. 1.05). Meanwhile, the isolating effect of amorphous carbonaceous species from the thermal decomposition of the organic complexing agent on the active phases was directly observed, and the stabilizer role was powerfully verified. Therefore, the resultant catalyst not only realized better Ni-promoted effects (synergetic factor = 7.5 vs. 5.3) but also exhibited excellent active phase morphology with much shorter length, higher stacking number and better dispersion. Finally, compared with the catalyst prepared from the conventional precursor, i.e. Mo7O246-, the Mo-NPs-derived catalyst shows the more excellent HDS activity of dibenzothiophene (reaction rate constant kHDS = 7.51 vs. 1.06 x 10-7 mol g-1 s-1; turnover frequency TOF = 5.56 vs. 1.43 h-1) and obviously enhanced HDS ratio of heavy coking diesel (99.8% vs. 96.2%). Besides, the resulting catalyst also holds a much higher HDS ratio as compared with the industrial catalyst (99.8% vs. 97.8%), showing a great potential in industrial application. The present work sheds light on the rational design of supported nanosized catalysts and provides a deeper understanding of the complicated structure-function relations. Using electropositive Mo-based nanoparticles (Mo-NPs) as precursor could realize the resulting catalyst with more uniform, shorter, higher layered, better Ni-promoted, and stable MoS2 slabs, thus holding excellent HDS performance.

Sulfided Mo/Al2O3 Hydrodesulfurization Catalyst Prepared by Ethanol-Assisted Chemical Deposition Method

Preparation of Hydrodesulfurization Catalysts Using MoS3 Nanoparticles As a Precursor

Effect of sulfiding conditions on the hydrodesulfurization performance of the ex-situ presulfided CoMoS/γ-Al2O3 catalysts

Synthesis of MoSs/Al2O3 Composites and Its Application in Preparation of Hydrogenation Catalysts

A novel and facile strategy for the preparation of highly reactive NiMo/γ-Al 2 O 3 hydrodesulfurization catalyst

Modulating Crystallization of MoS 2 Nanostructures by Dimethyl Sulfoxide for Enhanced Hydrodesulfurization

Preparation of MoS2 Nanocatalyst and Its Application in Hydrodesulfurization

The preparation of Mo/γ-Al2O3 catalysts with controllable size and morphology via adjusting the metal-support interaction and their hydrodesulfurization performance

Preparation of Supported Hydrodesulfurization Catalysts with Enhanced Performance Using Mo-based Inorganic–organic Hybrid Nanocrystals As a Superior Precursor

Electronic structure regulation of CoMoS catalysts by N, P co-doped carbon modification for effective hydrodesulfurization

Highly Selective Hydrodesulfurization of Gasoline on Unsupported Co-Mo Sulfide Catalysts: Effect of MoS2 Morphology

Hydrodesulfurization Catalyst Prepared by Urea-Matrix Combustion Method

Fabrication of Well-Structured NiMo Hydrodesulfurization Catalysts Using Electropositive Mo-based Nanoparticles

Highly Active CoMoS/Al2O3 Catalysts Ex Situ Presulfided with Ammonium Sulfide for Selective Hydrodesulfurization of Fluid Catalytic Cracking Gasoline

CoMo/Al2O3 Catalysts Prepared by Tailoring the Surface Properties of Alumina for Highly Selective Hydrodesulfurization of FCC Gasoline

Highly-efficient Hydrodesulfurization Driven by an In-Situ Reconstruction of Ammonium/amine Intercalated MoS2 Catalysts

Control of metal-support interaction in magnetic MoS2 catalyst to enhance hydrodesulfurization performance

Tailoring the Structure of Co-Mo/mesoporous Γ-Al2o3 Catalysts by Adding Multi-Hydroxyl Compound: A 3000 Kt/a Industrial-Scale Diesel Ultra-Deep Hydrodesulfurization Study

Construction of High Content CoMoS Active Sites Through the Combination of Co 5 Mo 10 Molecular Precursors and Inert Carbon Matrix Support for Deep Hydrodesulfurization

Hydrodesulfurization of 4,6-DMDBT on a Multi-Metallic Sulfide Catalyst with Layered Structure

Essential Role of Promoter Co on the MoS 2 Catalyst in Selective Hydrodesulfurization of FCC Gasoline