Abstract:As HDS catalysts, the supported catalysts including oxide state Mo, Co–Mo and sulfide state Mo on carbon nanotube (CNT) were prepared, while the corresponding supported catalysts on γ-Al2O3 were prepared as comparison. Firstly, the dispersion of the active phase and loading capacity of Mo species on CNT was studied by XRD and the reducibility properties of Co–Mo catalysts in oxide state over CNTs were investigated by TPR while the sulfide Co–Mo/CNT catalysts were characterized by XRD and LRS techniques. Secondly, the activity and selectivity of hydrodesulfurization (HDS) of dibenzothiophene with Co–Mo/CNT and Co–Mo/γ-Al2O3 were studied. It has been found that the main active molybdenum species in the oxide state MoO3/CNT catalysts were MoO2, rather than MoO3 as generally expected. The maximum loading before formation of the bulk phase was lower than 6%m (calculated in MoO3). The TPR studies revealed that that active species in oxide state Co–Mo/CNT catalysts were more easily reduced at relatively lower temperatures in comparison to those in Co–Mo/γ-Al2O3, indicating that the CNT support promoted the reduction of active species. Among 0–1.0 Co/Mo atomic ratio on Co–Mo/CNT, 0.7 has the highest reducibility. It shows that the Co/Mo atomic ratio has a great effect on the reducibility of active species on CNT and their HDS activities and that the incorporation of cobalt improved the dispersion of molybdenum species on CNT and mobilization. It was also found that re-dispersion could occur during the sulfiding process, resulting in low valence state Mo3S4 and Co–MoS2.17 active phases. The HDS of DBT showed that Co–Mo/CNT catalysts were more active than Co–Mo/γ-Al2O3 and the hydrogenolysis/hydrogenation selectivity of Co–Mo/CNT catalyst was also much higher than Co–Mo/γ-Al2O3. For the Co–Mo/CNT catalysis system, the catalyst with Co/Mo atomic ratio of 0.7 showed the highest activity, whereas, the catalyst with Co/Mo atomic ratio of 0.35 was of the highest selectivity.

Tuning active sites in MoS2-based catalysts via H2O2 etching to enhance hydrodesulfurization performance

Catalytic Characteristics of Active Corner Sites in CoMoS Nanostructure Hydrodesulfurization – A Mechanism Study Based on DFT Calculations

Oxygen Effects on the Structure and Hydrogenation Activity of the MoS2 Active Site: A Mechanism Study by DFT Calculation

Construction of High Content CoMoS Active Sites Through the Combination of Co 5 Mo 10 Molecular Precursors and Inert Carbon Matrix Support for Deep Hydrodesulfurization

Synergistic effect between CoS x and MoS 2 at the micrometer scale: Considerable promotion of the hydrodesulfurization of DBT

Electronic structure regulation of CoMoS catalysts by N, P co-doped carbon modification for effective hydrodesulfurization

Precise Tuning the CoMoOx/Al2O3 and CoMoSx/Al2O3 Interfacial Structures for Efficient Hydrodesulfurization of Dibenzothiophene

Identification of Co-O-Mo Active Centers on Co-Doped MoS2 Electrocatalyst

Identification of Co–O–Mo Active Centers on Co-Doped MoS<sub>2</sub> Electrocatalyst

Synergistic effect and coordination environment tuned water-gas shift reaction on MoS2 catalyst

Modulating Crystallization of MoS 2 Nanostructures by Dimethyl Sulfoxide for Enhanced Hydrodesulfurization

Influence of Active Phase Structure of CoMo/Al2O3 Catalyst on the Selectivity of Hydrodesulfurization and Hydrodearomatization

Targeted fabrication of 1T-MoS2 enriched nanosheets vertically oriented on spiny-shaped nanospheres with sufficient sulfur vacancies and “rim” sites for co-enhancing the hydrodesulfurization activity and hydrogenation selectivity

Spectroscopic Identification of Active Centers and Reaction Pathways on MoS2 Catalyst for H2 Production Via Water-Gas Shift Reaction

Preparation of MoS2 Nanocatalyst and Its Application in Hydrodesulfurization

Highly-efficient Hydrodesulfurization Driven by an In-Situ Reconstruction of Ammonium/amine Intercalated MoS2 Catalysts

The regulatory role of cysteine in active phase construction of polyoxometalate-based hydrodesulfurization catalysts: Reduction, chelation, and dispersion

Electronic state tuning over Mo-doped W18O49 ultrathin nanowires with enhanced molecular oxygen activation for desulfurization

A novel and facile strategy for the preparation of highly reactive NiMo/γ-Al 2 O 3 hydrodesulfurization catalyst

States of Carbon Nanotube Supported Mo-Based HDS Catalysts

Sulfided Mo/Al2O3 Hydrodesulfurization Catalyst Prepared by Ethanol-Assisted Chemical Deposition Method