Abstract:Traditionally prepared CoMo/Al2O3 hydrotreating catalysts, although efficient for deep desulfurization, are not suitable for fluid catalytic cracking (FCC) gasoline hydrodesulfurization (HDS) due to their high olefin hydrogenation (HYD) activity especially when the HDS conversion is high. Herein, two alumina supports with tailored surface properties were prepared by calcination of hydrothermally treated pseudo-boehmite (PB) and hydro thermally treated gamma-Al2O3 in order to design CoMo/Al2O3 catalysts with high HDS selectivity. It is found that compared with the traditional alumina prepared by direct calcination of PB, the two tailored alumina supports have notably decreased surface area, surface hydroxyl groups and Lewis acidity. The characterization results show that the catalysts obtained from CoMo supported on the two tailored supports have lowered Mo dispersion, weakened metal-support interaction, increased Mo sulfidation degree and longer MoS2 slabs than the traditional CoMo/Al2O3 catalyst. The catalytic results of three different CoMo/Al2O3 catalysts in the HDS of a full-range FCC gasoline show that the HDS selectivity is increased remarkably (selectivity factors increase from 5.5 to 11.0) with the decreased surface area, surface hydroxyl groups and Lewis acidity of the alumina supports. Especially, CoMo supported on the tailored alumina support prepared by calcination of hydrothermally treated gamma-Al2O3 (denoted as CoMo/Al2O3-3) exhibits a 15% lower olefin HYD activity than traditional Como/Al2O3 catalyst even at the same and high HDS conversion (95%). The greatly improved HDS selectivity can be well explained by the increased slab length of supported MoS2 particles, resulting in notably decreased HYD activity catalyzed by the corner sites. Besides, CoMo/Al2O3-3 also shows superior HDS selectivity in the HDS of a real heavy FCC naphtha, where the sulfur content can be reduced from 309 ppm to 10 ppm with an accompanying RON loss of only 1.0 unit.

Hydroisomerization of Model Naphtha over Sulfided Co-Mo/SBA-15 Catalyst

Hydroisomerization of Model FCC Naphtha over Sulfided Co(Ni)–Mo(W)/MCM-41 Catalysts

Catalytic Characteristics of Active Corner Sites in CoMoS Nanostructure Hydrodesulfurization – A Mechanism Study Based on DFT Calculations

Skeletal Isomerization of 1-Hexene over Sulfided Co/Co-Mcm-41 Catalysts

Effect of Solvents on the Hydrogenation and Isomerization of 1-Hexene over Sulfided Co−Mo/γ-Al 2O 3 Catalysts for Hydrodesulfurization

Selective Hydrodesulfurization of Gasoline on Co/MoS 2±x Catalyst: Effect of Sulfur Defects in MoS 2±X

CoMoS/modified-kaolin bi-functional hydrodesulfurization-olefin skeletal isomerization catalyst for FCC naphtha hydro-upgrading

Mesoporous Carbon Supported Co-Mo and Ni-Mo Catalysts for Hydrodesulfurization

Hydrodesulfurization of Thiophene in n-Heptane Stream Using CoMo/SBA-15 and CoMo/AlSBA-15 Mesoporous Catalysts

Highly Selective Hydrodesulfurization of Gasoline on Unsupported Co-Mo Sulfide Catalysts: Effect of MoS2 Morphology

Influence of Active Phase Structure of CoMo/Al2O3 Catalyst on the Selectivity of Hydrodesulfurization and Hydrodearomatization

Preparation of Co-Mo/γ-Al2O3 catalyst and the catalytic hydrogenation effects on coal-related model compounds

Effect of sulfiding conditions on the hydrodesulfurization performance of the ex-situ presulfided CoMoS/γ-Al2O3 catalysts

Essential Role of Promoter Co on the MoS 2 Catalyst in Selective Hydrodesulfurization of FCC Gasoline

Enhancement of hydrotreating activity of oil-soluble CoMo6 heteropolyacid for 4,6-dimethyldibenzothiophene and vacuum residue by controlling sulfurization degree

Electronic structure regulation of CoMoS catalysts by N, P co-doped carbon modification for effective hydrodesulfurization

Highly Active CoMoS/Al2O3 Catalysts Ex Situ Presulfided with Ammonium Sulfide for Selective Hydrodesulfurization of Fluid Catalytic Cracking Gasoline

Effect of Hydrogen Spillover in Selective Hydrodesulfurization of FCC Gasoline over the CoMo Catalyst

Enhanced hydrodesulfurization activity of thiophene over hollow tubular CoMo unsupported catalysts

One-step Synthesis of Ultrafine MoNiS and MoCoS Monolayers As High-Performance Catalysts for Hydrodesulfurization and Hydrodenitrogenation

CoMo/Al2O3 Catalysts Prepared by Tailoring the Surface Properties of Alumina for Highly Selective Hydrodesulfurization of FCC Gasoline