Abstract:The sole micropores strictly restrict the wide utilization of TS-1 zeolite in the catalytic fields, especially in the catalytic conversion of compounds with large molecular sizes. Here, we report a feasible and economical method to overcome this drawback. In this work, the hierarchical TS-1 zeolite was constructed via post-acid treatment, post-alkali etching, and a combination of post-acid treatment and alkali etching methods, after which, the corresponding NiMo-supported catalysts were prepared via the incipient wetness impregnation method. Then, the aforementioned materials were fully characterized using X-ray diffraction (XRD), N-2 adsorption-desorption, pyridine adsorbed Fourier transform infrared spectroscopy (Py - FTIR), H-2 temperature programmed reduction (H-2 - TPR), X-ray photoelectron spectroscopy (XPS), and high-resolution transition electron microscope (HR-TEM) to unravel the changes in the physicochemical properties caused by the post treatments. Finally, the hydrodesulfurization of dibenzothiophene (DBT) was used as a probe to assess the effects of the post-treatments on the catalytic performance of the hierarchical NiMo/TS-1 catalysts. The results showed that the MFI topology of TS-1 zeolite remained undamaged significantly and the serial hierarchical TS-1 zeolites exhibited higher specific surface areas and mesopore structures. Moreover, appropriate amounts of Bronsted acid sites were formed at the surface of the serial hierarchical TS-1 zeolites. The interaction between the active metals and the support materials was also modulated by the post-treatment of TS-1 zeolite, which resulted in better dispersion of Ni promoted MoS2 slabs with a higher proportion of NiMoS active phase, further leading to the enhanced catalytic activity and direct desulfurization pathway selectivity of the corresponding serial hierarchical NiMo/TS-1 catalysts. Among all the prepared catalysts, the catalytic activity was enhanced by approximately 1.2 times over catalyst NiMo/AT-TS-1 obtained by post-acid treatment compared to that over catalyst NiMo/TS-1 without treatment and on which the selectivity of the DDS pathway was 22% higher compared to that over catalyst NiMo/TS-1.

Progress of Catalysts for Deep Hydrodesulfurization of Fuels

Hierarchical TS-1 zeolite loaded with NiMo catalysts: Preparation and performance in hydrodesulfurization

Effects of Ga- and P-modified USY-based NiMoS catalysts on ultra-deep hydrodesulfurization for FCC diesels

The Effect of Hydrophobically Modified Iron Catalysts with Hexadecyltrimethoxysilane on Fischer‐Tropsch Synthesis

Highly-efficient Hydrodesulfurization Driven by an In-Situ Reconstruction of Ammonium/amine Intercalated MoS2 Catalysts

A Potassium Tert-Butoxide and Hydrosilane System for Ultra-Deep Desulfurization of Fuels

Development of New Generation Catalysts for Selective Hydrodesulfurization of Fcc Naphtha

Recent developments in alumina supported hydrodesulfurization catalysts for the production of sulfur-free refinery products: A technical review

Design And Synthesis Of Metal Sulfide Catalysts Supported On Zeolite Nanofiber Bundles With Unprecedented Hydrodesulfurization Activities

Mesoporous Carbon Supported Co-Mo and Ni-Mo Catalysts for Hydrodesulfurization

Research and Development of Petroleum Hydrodesulfurization Catalysts with Al2O3-based Supports

Oxidative desulfurization of gasoline using hydrogen peroxide over modified mesoporous material HMS by phosphotungstic acid

Hydroisomerization of Model FCC Naphtha over Sulfided Co(Ni)–Mo(W)/MCM-41 Catalysts

Construction of High Content CoMoS Active Sites Through the Combination of Co 5 Mo 10 Molecular Precursors and Inert Carbon Matrix Support for Deep Hydrodesulfurization

Oxidative Desulfurization of FCC Diesel Oil Using Amphiphilic Catalyst Combined with Solvent Extraction

Titanium dioxide modified nanosized TS-1 zeolite supported phosphotungstic acid as a catalyst for deep catalytic oxidative desulfurization of fuel oil

Hydrodesulfurization of diesel in a slurry reactor

Boosting ultra-deep hydrodesulfurization of diesel by tuning sulfidation degree of metals on NiMo/AlOOH catalyst

Electronic structure regulation of CoMoS catalysts by N, P co-doped carbon modification for effective hydrodesulfurization

Hydrodesulfurization of Gas Condensate containing Di-Sulfide Oil: Catalyst synthesis and evaluation

High-entropy zeolitic imidazolate framework for efficient oxidative desulfurization of diesel fuel: Towards complete sulfur removal and valuable sulfone production