Abstract:Conductive Cu patterns were constructed on flexible paper via selectively electroless plating method, which including multistep procedures, namely, 3-aminopropyltrimethoxysilane (APTMS)-modification, selective Cu0-seeding and Cu-lines deposition. Herein, the Cu0 activation process could be divided into two stages: the Cu2+-absorption in cupric citrate solution and subsequently the Cu2+-reduction using a roller pen filled with sodium borohydride ink. The interaction of APTMS onto paper was confirmed by FT-IR measurement and the results indicated that the –NH2 groups originating from APTMS were grafted on the paper. The elemental analysis of the samples in each step was conducted using XPS measurement. Paper-based conductive patterns were investigated by SEM, XRD and Scotch®-tape test. SEM images illustrated that the Cu lines on the APTMS modified paper substrate was compact and composed of ball-shaped copper nuclei. Moreover, the Cu lines could be selectively plated on the required area of the paper substrate. XRD analysis showed that the obtained Cu patterns had a structure with Cu (1 1 1) preferred orientation, revealing an excellent electromigration resistivity. The resultant Cu patterns exhibited an admired adhesion to modified paper, while the Cu patterns obtained in absence of APTMS modification suffered a failure in the adhesive Scotch®-tape test. The resistivity of copper patterns characterized by the digital four-point probe was 10.3 µΩ cm, which was 6.3 times of the bulk Cu. Meanwhile, paper-based Cu pattern remained excellent conductivity after multifolding. Those results indicated that the method proposed in the present work offered a robust and efficient alternative to manufacture flexible electronics.

Fabrication of Conductive Copper Patterns Using Photocatalyst-activated Electroless Deposition

Fabrication of Conductive Copper Patterns Using Reactive Inkjet Printing Followed by Two-Step Electroless Plating

Electroless Plating of Copper via a Sn-Free Process on Dielectric SiLK Surface Modified by UV-Induced Graft Copolymerization with 4-Vinylpyridine and 1-Vinylimidazole

Fabrication of Copper Patterns on Polydimethylsiloxane Through Laser-Induced Selective Metallization

Fabrication of copper patterns on flexible substrate by patterning-adsorption-plating process.

Rapid Preparation of Patterned Conductive Films Based on in Situ Voltaic Cell Templated 3D Controllable Metal Deposition

Preparation of Selective Conductive Copper Patterns by Pen-on-paper Writing Combined with Electroless Plating

Fabrication of flexible copper patterns by electroless plating with copper nanoparticles as seeds

Direct writing patterns for electroless plated copper thin film on plastic substrates

Selective Electroless Copper Plating of Ink-Jet Printed Textiles Using a Copper-Silver Nanoparticle Catalyst

Fabrication of metallic patterns on ordinary polymer substrates by laser direct activation and electroless plating

Custom Writing Catalytic Tracks for Selective Pattern Metallization on Flexible Substrate

Electroless Plating Cycle Process for High-Conductivity Flexible Printed Circuits

Emerging Non-Noble-Metal Atomic Layer Deposited Copper as Seeds for Electroless Copper Deposition

Fabrication of User-Defined Copper Conductive Patterns Onto Paper Substrate for Flexible Electronics by Combining Wax Patterning with Electroless Plating

Fabrication of dual-side metal patterns onto textile substrates for wearable electronics by combining wax-dot printing with electroless plating

Fabricating Metallic Circuit Patterns on Polymer Substrates Through Laser and Selective Metallization.

Copper Pattern on Self-Assembled Monolayer Through Microcontact Printing

Direct Surface In-Situ Activation for Electroless Deposition of Robust Conductive Copper Patterns on Polyimide Film

3D Porous Polysiloxane Ion-Adsorption Films for Additive Fabrication of Conductive Patterns with High Adhesion

Click Electroless Plating and Sonoplating of Polyester with Copper Nanoparticles Producing Conductive Fabric