Abstract:Although different damage-coupled physically based models have been proposed, those damage models are established based on the isothermal uniaxial or multi-axial tensile condition. However, the influence of the stress state on ductile failure strain is not adequately considered in the thermal damage models. It is widely recognized that the stress state has significant effect on damage evolution and ductility fracture for metallic materials. Actually, the current damage-coupled physically based models are not suitable for complex hot forming and the applications of these damage-coupled models are mainly focused on sheet hot stamping forming to date. Therefore, a modified damage-coupled unified model considering a broad range of stress states was established to figure out the complex damage behavior and microstructure evolution of metallic materials during the thermal deformation process. In this study, the Mg-6Gd-5Y-0.3Zr alloy was used as the experimental material. First, the flow behavior of the alloy was explored using a series of experiments under various stress states (i.e., uniaxial tensile, shear and compression) under various combinations of strain rates and temperatures. On this basis, a modified damage-coupled physics-based model was developed, in which the dynamic recrystallization, damage, stress triaxiality and Lode parameter were included as internal state variables. Furthermore, the model was integrated into ABAQUS to verify the applicability using hot spinnability test because the stress state was very complex during the forming process. The comparison between the calculated results and experiments is carried out. According to the simulation result, the predicted ultimate thinning rate is 71.14%, with an error of only 7.85% from the experimentally measured ultimate thinning rate of 77.2%, and the correlation coefficient and error for thickness and profile between the predicted values and experimental values are 0.9980 and 5.05%, respectively. These demonstrate that the developed model is reliable.

A damage model to evaluate the mechanical properties in the medium-long life stage for coating system subjected to elevated thermal loads with 3D-DIC technique

Study on the Prediction Method of the Ultra-Low-Cycle Fatigue Damage of Steel

A Model for Ultra Low Cycle Fatigue Damage Prediction of Structural Steel

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Characterization of isothermal and cyclic thermal damage of EB-PVD TBCs with the help of the 3D-DIC technique

A damage sequence interaction model for predicting the mechanical property of in-service aluminium alloy 6005A-T6

A Thermal Damage-Coupled Constitutive Model for Predicting Fracture and Microstructure Evolution and Its Application in the Hot Spinnability Process

A New Life Prediction Model Based on Ductility Exhaustion Theory for High Temperature Low Cycle Fatigue of Turbine Disk Alloys

A new combined impact fatigue damage model and its application of influencing factors analysis on impact fatigue of TC18 titanium alloy

Damage Behavior and Life Prediction Model of Composite Laminates under Combined High and Low Cycle Fatigue

A CDM model for remaining fatigue-lifetime prediction of ductile metals

Cross-scale modeling and elasto-plastic mechanical properties of TBC with 3D hill-like interface

A New Critical Plane-Energy Model for Multiaxial Fatigue Life Prediction of Turbine Disc Alloys

Coupled crystal plasticity and micromechanics damage model based on viscoplastic self-consistent theory and X-ray computed tomography

Determination of relationship between high-temperature low cycle fatigue damage and mechanical property degradation: Experimental and theoretical analyses

An Innovative Model Coupling TGO Growth and Crack Propagation for the Failure Assessment of Lamellar Structured Thermal Barrier Coatings

A Continuous Low Cycle Fatigue Damage Model and Its Application in Engineering Materials

Numerical study of thermomechanical delamination mechanisms in segmented high-temperature coatings

Comprehensive Dynamic Failure Mechanism of Thermal Barrier Coatings Based on a Novel Crack Propagation and TGO Growth Coupling Model

Chemo-thermo-mechanical modeling of EB-PVD TBC failure subjected to isothermal and cyclic thermal exposures

A modified nonlinear cumulative damage model for combined high and low cycle fatigue life prediction