Abstract:Failure of thermal barrier coating (TBC) systems is closely related to the temperature field and stress state of their components. The lack of accurate cross-scale analysis methods has made it difficult to clarify the mechanical properties and damage mechanisms of TBC interfaces. This study proposes a cross-scale modeling method for TBC called the thermal barrier coating master–slave model (TMSM). First, the TMSM is established based on Saint-Venant's principle, thermal elastoplastic mechanics theory, and the von Mises yield criterion, and its applicability is discussed considering mesh conditions, geometric conditions, and cyclic conditions. The advantages of the TMSM are then demonstrated by comparison with the slave model. Finally, the effects of material plasticity and oxide thickness on the damage of the TBC were analysed using the TMSM. The results showed that the boundary effect can be eliminated using the slave model with an interface side length of 160 μm. The interfacial axial stress obtained by the TMSM was greater than that obtained by the slave model. The thermal mismatch stress caused by thermal material expansion at high temperatures and the residual stress caused by material plasticity at the moment of cooling are the two main causes of TBC failure. When the thickness range of the oxide layer is 2–3 μm, the oxide layer will inhibit the maximum thermal stress during thermal cycles, which is supported by the results of fatigue experiments conducted under the same condition. This study provides a new approach for the cross-scale analysis of TBC and demonstrates the positive effect of thermally grown oxide thickness on the thermal shock resistance of TBC using numerical analysis.

Chemo-thermo-mechanical modeling of EB-PVD TBC failure subjected to isothermal and cyclic thermal exposures

Characterization of isothermal and cyclic thermal damage of EB-PVD TBCs with the help of the 3D-DIC technique

Comprehensive Dynamic Failure Mechanism of Thermal Barrier Coatings Based on a Novel Crack Propagation and TGO Growth Coupling Model

Modeling 3D TGO dynamic growth and stresses and the resulting modes of buckling failure in thermal barrier coatings

Failure Characteristics and Life Prediction for Thermally Cycled Thermal Barrier Coatings

Failure of Electron Beam Physical Vapor Deposited Thermal Barrier Coatings System under Cyclic Thermo-Mechanical Loading with a Thermal Gradient

Thermomechanical and Thermal Gradient Mechanical Fatigue Lifetime of Thermal Barrier Coating Systems

Comprehensive Understanding of the Effect of TGO Growth Modes on Thermal Barrier Coating Failure Based on a Simulation

THz-TDS characterization of stress evolution of EB-PVD TBCs under thermal cycling

Fracture Behavior of TBCs with Cooling Hole Structure under Cyclic Thermal Loadings

Dynamic Crack Growth Mechanism and Lifetime Assessment in Plasma Sprayed Thermal Barrier System Upon Temperature Cycling

Thermal shock behaviors and failure mechanisms of EB-PVD thermal barrier coatings using radiant heating

An Innovative Model Coupling TGO Growth and Crack Propagation for the Failure Assessment of Lamellar Structured Thermal Barrier Coatings

Cross-scale modeling and elasto-plastic mechanical properties of TBC with 3D hill-like interface

Stress States and Crack Behavior in Plasma Sprayed TBCs Based on a Novel Lamellar Structure Model with Real Interface Morphology

Thermal cycling induced crack nucleation and propagation in thermal barrier coating system

Failure Mechanism of EB-PVD Thermal Barrier Coatings under the Synergistic Effect of Thermal Shock and CMAS Corrosion

Simulation of Residual Stresses and Their Effects on Thermal Barrier Coating Systems Using Finite Element Method

Stress Profile and Crack Evolution in a Three-Dimensional (3D) Thermal Barrier Coatings During Isothermal Cyclic Test

Analysis On Stress Distribution Of Thermal Barrier Coating System With Thermal Gradient Mechanical Fatigue

Dynamic Evolution of Nonuniform Temperature-Stress Distributions in Continuously Eroding Thermal Barrier Coatings