Abstract:The desire for light weight materials, particularly in the automotive field, is fuelling greater magnesium production. The Pidgeon process is currently the most widely used process for the production of magnesium. This batch process involves reduction of dolomite by ferro-silicon, carried out at temperature between 1100-1200 o C under vacuum in a retort, producing magnesium vapour which is then cooled and collected as a condensate. The major attractions of the process are its simplicity and low capital cost; however, the process is also labour and energy intensive. The Magnetherm process is also a vacuum batch process based on similar chemistry but operates at higher temperatures with magnesia dissolved in a slag. Various operational issues relating to the batch and vacuum nature of the process have limited its development. Higher temperatures will improve the kinetics of the silicothermic reduction but will also promote greater impurities into the vapour. Thermodynamic analysis of the distribution of impurities during condensation of magnesium vapour has been carried using FactSage thermodynamic package. The results from the multi-stage equilibrium model show that at equilibrium it should be possible to condense solid impurities before the majority of the magnesium vapour is condensed below 750 o C, depending on the operating pressure of the system and the particular chemistry of the process. The model predicts that purities above 99.8wt% can be achieved for the Pidgeon process and 99.4wt% for the Mintek process. Without multi-stage condensation, the impurities in the metal are predicted to be significantly higher for the Mintek process (2.14wt% compared to 0.6 wt%). These results are broadly consistent with existing industrial data.

A method of removal of nickel impurity from electrolytic magnesium

Study of the electrochemical behavior of Ni(II) impurity in MgCl2–KCl–NaCl melt

Removal of Aqueous Ni(Ii) with Carbonized Leaf Powder: Kinetics and Equilibrium

Separation of Magnesium Impurity from Nickel and Cobalt Mixtures Using Ethylenediaminetetraacetic Acid and Temperature Optimization

Preparation of High-Purity Magnesium from Electrolytically Produced Crude Magnesium via Vacuum Distillation

Preparation of high purity magnesium by vacuum gasification-directional condensation technology

Electrochemical separation of Fe(III) impurity from molten MgCl 2 -NaCl-KCl for magnesium electrolytic production

Separation of nickel, cobalt and magnesium from the spent MH-NI and CD -NI battery anode materials

The Separation Behavior of Impurities in the Purification of High-Purity Magnesium via Vacuum Distillation

Feasibility of Employing the Cooled Finger, a Fractional Crystallization Method for the Purification of Magnesium

Dealloying Superalloy by Liquid Mg for the Selective Extraction of Ni

One-step preparation of high purity magnesium by vacuum distillation technology

Efficient Removal of Lead Impurity for the Purification and Recycling of Nickel from Secondary Sources Based on Ball-Milling Activated CaCO3

Technical research on vacuum distillation to purify magnesium to 99.99% purity

A novel electrochemical deintercalation for magnesium ions separation and purification in manganese metallurgy

Effects of the Amount of Mg Impurity on the Electrochemical Properties of Ml(NiCoMnTi)5 Hydrogen Storage Alloy

Extraction of Cu and Ni from Low-Ni Matte by a Combined Chemical Precipitation and Molten Salt Electrolysis Approach

Scale-Up Study of Molten Salt Electrolysis using Cu or Ag Cathode and Vacuum Distillation for the Production of High-Purity Mg Metal from MgO

Removal of Ni(II) from strongly acidic wastewater by chelating precipitation and recovery of NiO from the precipitates

Distribution of impurities in magnesium via silicothermic reduction

A green production process of electrolytic manganese metal based on solvent extraction