Abstract:An alternative to the existing method of processing secondary magnesium raw materials by remelting in a salt furnace can be distillation separation into volatile metals (Mg, Zn and Cd), low-volatile metals (Al, Mn and Zr) and rare earth elements. The separation of metals may be tracked based on phase diagrams where the field boundaries of the vapor–liquid equilibrium are plotted. Due to the fact that Mg, Zn and Cd have comparable saturated vapor pressures, the possibility of the distillation separation of Mg–Zn and Mg–Cd systems using full state diagrams including the melt–vapor phase transition boundaries were determined in this work. The boundaries of these systems were calculated based on the partial values of saturated vapor, determined by the boiling point method, and presented in the form of temperature–concentration dependencies with the indicated boundaries. The field boundaries were calculated (L + V) at atmospheric pressure (101.33 kPa) and in vacuum (1.33 kPa and 0.7 kPa,) supposing the implementation of the process. The possibility of the separate extraction of zinc and cadmium from magnesium was considered using complete phase diagrams including the boundaries of the melt–steam phase transition. When considering the boundaries of the vapor–liquid equilibrium in the binary systems Mg–Zn and Mg–Cd, it was established that it is impossible to separate metals in one "evaporation–condensation" cycle in a vacuum of 1.33 and 0.7 kPa. The problem is caused by the small size of the fields (L + V) at the temperature, which suggests processes of the re-evaporation of the condensate from the previous distillation stage. The separation of zinc and cadmium from liquid alloys with magnesium under equilibrium conditions requires several repetitions of the condensate distillation process. In non-equilibrium conditions, the real processes will require a larger number of conversions. This implies the expediency of the joint evaporation of magnesium with zinc and cadmium and the use of condensate for additional charging to liquid magnesium, and the remainder of the distillation, where volatile metals such as Al, Mn, Zr and rare earth elements will be concentrated, should be directed to the preparation of ligatures for special magnesium-based alloys.

Scale-Up Study of Molten Salt Electrolysis using Cu or Ag Cathode and Vacuum Distillation for the Production of High-Purity Mg Metal from MgO

An Electrolytic Process Using an Ag Cathode and Vacuum Distillation for Mg Metal Production from MgO

Recent Progress in Molten Salt Electrolysis Using a Liquid Metal Cathode and Vacuum Distillation for the Production of Ultra-High-Purity Mg Metal from MgO

Development of Molten Salt Electrolysis of MgO Using a Metal Cathode and Vacuum Distillation to Produce Ultra-High Purity Mg Metal

Production of high-purity Mg metal from dolomite through novel molten salt electrolysis and vacuum distillation

Use of various MgO resources for high-purity Mg metal production through molten salt electrolysis and vacuum distillation

A novel electrolytic process using a Cu cathode for the production of Mg metal from MgO

Preparation of High-Purity Magnesium from Electrolytically Produced Crude Magnesium via Vacuum Distillation

Electrochemical separation of Fe(III) impurity from molten MgCl 2 -NaCl-KCl for magnesium electrolytic production

Synthesis of functional ionic liquids with high extraction rate and electroconductivity for lithium-magnesium separation and metallic magnesium production from salt lake brine

Development of Numerical Analysis Model for New Magnesium Electrolysis Process Using COMSOL

A novel electrochemical deintercalation for magnesium ions separation and purification in manganese metallurgy

Feasibility of Employing the Cooled Finger, a Fractional Crystallization Method for the Purification of Magnesium

Preparation of high purity magnesium by vacuum gasification-directional condensation technology

Technical research on vacuum distillation to purify magnesium to 99.99% purity

Development of deoxidation process for off-grade titanium sponge using magnesium metal with wire mesh strainer type of crucible

On the Problem of the Distillation Separation of Secondary Alloys of Magnesium with Zinc and Magnesium with Cadmium

Improving the Mg Sacrificial Anode in Tetrahydrofuran for Synthetic Electrochemistry by Tailoring Electrolyte Composition.

Solidophobic Surface for Electrochemical Extraction of High-Valued Mg(OH)2 Coupled with H2 Production from Seawater

The Transition of Mg-Containing Phases and Recovery of NaCl in Molten Salt Chloride Slags at High Temperature

Evaluating the synthesis of Mg[Al(hfip)4]2 electrolyte for Mg rechargeable batteries: purity, electrochemical performance and costs