Production of high-purity Mg metal from dolomite through novel molten salt electrolysis and vacuum distillation

Hyeong-Jun Jeoung,Tae-Hyuk Lee,Jin-Young Lee,Kyung-Woo Yi,Jungshin Kang

DOI: https://doi.org/10.1016/j.jma.2022.10.007

IF: 11.813

2022-11-19

Journal of Magnesium and Alloys

Abstract:In this study, a novel Mg production process for producing high-purity Mg metal from dolomite was developed. When the electrolysis of calcined dolomite was conducted using Cu cathode and C anode in MgF 2 – LiF molten salt at 1083–1173 K by applying an average current of 1.42–1.46 A for 9.50–21.0 h, the current efficiency of 66.4–88.6% was obtained. The produced Mg alloys consisted of MgCu 2 and Cu (Mg) or MgCu 2 and CuMg 2 phases, depending on the Mg concentration in the Mg alloy. When the electrolysis of calcined dolomite was conducted in MgF 2 – LiF – CaF 2 molten salt at 1083 K, the current efficiency was 40.9–71.4%, owing to undesired reactions such as electroreduction of Ca 2+ or/and CO 3 2− ions. Meanwhile, the current efficiency increased from 40.9% to 63.2% by utilizing a Pt anode, because the occurrence of CO 3 2− ions in the molten salt was prevented. After vacuum distillation of the obtained Mg alloys at 1300 K for 10 h, Mg metal with a purity of 99.9996–99.9998% was produced. Therefore, the feasibility of this novel process for the production of high-purity Mg metal from dolomite was demonstrated.

metallurgy & metallurgical engineering