Abstract:High purity manganese sulfate(MnSO 4 ) is of great importance due to its applications in lithium-ion batteries, pharmaceutical applications, and within feed additives. As manganese always occurs in combination with iron, laterite and other minerals, co-leaching of Mn and Fe complicates the purification procedure of MnSO 4 . Obtaining high purity MnSO 4 without contamination of calcium and magnesium is difficult, because of their similar chemical properties. Current research involved preparation of highly pure MnSO 4 from low purity MnO 2 . A simple and efficient procedure has been developed for purification of MnSO 4 by using a carbon adsorbent followed by treatment with iminodiacetate functionalised resin polymer. The two-step procedure enabled an extremely pure MnSO 4 generally exceeding 99.9%. Iron has been efficiently removed to below 5 ppm (>99% reduction from ∼1000 ppm), calcium was reduced to ∼100 ppm (>90% reduction from ~1600 ppm) and magnesium was reduced to below 10 ppm (>99% reduction from ~1400 ppm). Adiitionally, simple carbon adsorption effectively reduced lead and zinc to below their detection levels (< 0.050 and 5.00 ppm, respectively) and arsenic was reduced to below its level of quantification (< 0.375 ppm). Careful adaptation of the procedure allows for producing high purity manganese salts at a larger scale. Le sulfate de manganèse d'une grande pureté est d'une grande importance en raison de ses applications dans les batteries aux ions de lithium, de ses applications pharmaceutiques et comme additifs alimentaires. Les minerais de manganèse de haute qualité tels que la pyrolusite (MnO 2 , 63.2% Mn) sont appauvris, et les minerais de Fe-Mn tels que le mica ferromagnésien (K(Mg,Fe) 3 (AlSi 3 O 10 )(F,OH) 2 ) deviennent des ressources importantes pour l'extraction du manganèse. Comme le manganèse se trouve toujours en combinaison avec du fer, de la latérite et d'autres minéraux, la co-lixiviation du Mn et du Fe complique la procédure de purification du sulfate de manganèse. Obtenir du MnSO 4 d'une grande pureté sans contamination par le Ca et le Mg est difficile en raison de leurs propriétés chimiques similaires. Les recherches courantes impliquaient la préparation de sulfate de manganèse très pur à partir de bioxyde de manganèse de basse pureté. On a développé une procédure de traitement simple et efficace pour la purification du sulfate de manganèse en utilisant en utilisant un adsorbant au carbone suivi d'un traitement avec un polymère de résine fonctionnalisé par l'iminodiacétate. La procédure en deux étapes a permis d'obtenir un sulfate de manganèse extrêmement pur généralement supérieur à 99.9% et le fer a été éliminé efficacement à moins de 5 ppm (> 99% de sa teneur initiale ∼1000 ppm). Avec ce procédé, le calcium était réduit à environ 100 ppm (> 90%) par rapport à sa teneur initiale d'environ 1600 ppm et le magnésium était réduit à moins de 10 ppm (> 99%) par rapport à sa teneur initiale d'environ 1400 ppm. De plus, simplement en utilisant la technique d'adsorption, on a réduit les impuretés élémentaires de Pb et de Zn en dessous de leurs niveaux de détection (< 0.050, 5.00 ppm, respectivement), et As était réduit en dessous de son niveau de quantification (< 0.375 ppm). Une adaptation attentive de la procédure peut être d'une grande importance pour permettre la production à plus grande échelle des sels de manganèse d'une grande pureté.

Recovery of Mg from H2SO4 Leaching Solution of Serpentine to Precipitation of High-Purity Mg(OH)2 and 4MgCO3·Mg(OH)2·4H2O

Magnesium Chloride Crystals with Studying Mechanism and Leaching Kinetics of Serpentinite Ore by Hydrochloric Acid

Kinetic study of high-pressure acid leaching of Mg and Ni from serpentine

Efficient preparation of magnesium bicarbonate from magnesium sulfate solution and saponification-extraction for rare earth separation

Long-term effectiveness of lead precipitation as carbonate and its stability under acidic conditions by using activated serpentine mineral

Production of high-purity Mg metal from dolomite through novel molten salt electrolysis and vacuum distillation

Removal of Sulfate Ions from Calcium Oxide Precipitation Enrichment of a Rare Earth Leaching Liquor by Stirring Washing with Sodium Hydroxide

Technology for obtaining high-pure magnesium compounds using the hydrolytic processes of sedimentation

INFLUENCE OF HIGH-MOLECULARS COMPOUNDS OF DIFFERENT NATURE ON THE EFFICIENCY OF PURIFICATION THE MOTHER LIQUOR OF MAGNESIUM SULFATE PRODUCTION FROM IMPURITIES Fe3+, Al3+ AND Cr3+ BY ELECTROFLOTATION

The enrichment of rare earth from magnesium salt leaching solution of ion-adsorbed type deposit: A waste-free process for removing impurities

Extraction of lithium from brines with high Mg/Li ratio by the crystallization-precipitation method

Behavior of rare earth, iron, and phosphorus during purification of rare earth sulfate leach solution using magnesium oxide

Mechanochemically incorporating magnesium sulfate into antigorite to provide active nucleation sites for efficient precipitation of cadmium ions from weak acidic solution

Lithium Recovery from an Alumina Electrolysis Slag Leaching Solution with Strong Acidity: Separation of Lithium-Ion and Production of Battery Grade Lithium Carbonate

Synthesis of functional ionic liquids with high extraction rate and electroconductivity for lithium-magnesium separation and metallic magnesium production from salt lake brine

Synthesis and characterization of MgSO4·5Mg(OH)2·2H2O flake powders

Minerals recovery from a rare earth extraction wastewater by a combined chemical precipitation and membrane distillation process

Sulfate removal from wastewater using ettringite precipitation: Magnesium ion inhibition and process optimization

Recovery of Pure Co(II) and Ni(II) Solutions from Synthetic Sulfate Leach Liquor of Laterite Ores by Precipitation and Solvent Extraction

Preparation of high-purity manganese sulfate and removal of unwanted metal ions using resin-based purification

Separation of magnesium from lithium in salt-lake brine through struvite precipitation