Abstract:High purity manganese sulfate(MnSO 4 ) is of great importance due to its applications in lithium-ion batteries, pharmaceutical applications, and within feed additives. As manganese always occurs in combination with iron, laterite and other minerals, co-leaching of Mn and Fe complicates the purification procedure of MnSO 4 . Obtaining high purity MnSO 4 without contamination of calcium and magnesium is difficult, because of their similar chemical properties. Current research involved preparation of highly pure MnSO 4 from low purity MnO 2 . A simple and efficient procedure has been developed for purification of MnSO 4 by using a carbon adsorbent followed by treatment with iminodiacetate functionalised resin polymer. The two-step procedure enabled an extremely pure MnSO 4 generally exceeding 99.9%. Iron has been efficiently removed to below 5 ppm (>99% reduction from ∼1000 ppm), calcium was reduced to ∼100 ppm (>90% reduction from ~1600 ppm) and magnesium was reduced to below 10 ppm (>99% reduction from ~1400 ppm). Adiitionally, simple carbon adsorption effectively reduced lead and zinc to below their detection levels (< 0.050 and 5.00 ppm, respectively) and arsenic was reduced to below its level of quantification (< 0.375 ppm). Careful adaptation of the procedure allows for producing high purity manganese salts at a larger scale. Le sulfate de manganèse d'une grande pureté est d'une grande importance en raison de ses applications dans les batteries aux ions de lithium, de ses applications pharmaceutiques et comme additifs alimentaires. Les minerais de manganèse de haute qualité tels que la pyrolusite (MnO 2 , 63.2% Mn) sont appauvris, et les minerais de Fe-Mn tels que le mica ferromagnésien (K(Mg,Fe) 3 (AlSi 3 O 10 )(F,OH) 2 ) deviennent des ressources importantes pour l'extraction du manganèse. Comme le manganèse se trouve toujours en combinaison avec du fer, de la latérite et d'autres minéraux, la co-lixiviation du Mn et du Fe complique la procédure de purification du sulfate de manganèse. Obtenir du MnSO 4 d'une grande pureté sans contamination par le Ca et le Mg est difficile en raison de leurs propriétés chimiques similaires. Les recherches courantes impliquaient la préparation de sulfate de manganèse très pur à partir de bioxyde de manganèse de basse pureté. On a développé une procédure de traitement simple et efficace pour la purification du sulfate de manganèse en utilisant en utilisant un adsorbant au carbone suivi d'un traitement avec un polymère de résine fonctionnalisé par l'iminodiacétate. La procédure en deux étapes a permis d'obtenir un sulfate de manganèse extrêmement pur généralement supérieur à 99.9% et le fer a été éliminé efficacement à moins de 5 ppm (> 99% de sa teneur initiale ∼1000 ppm). Avec ce procédé, le calcium était réduit à environ 100 ppm (> 90%) par rapport à sa teneur initiale d'environ 1600 ppm et le magnésium était réduit à moins de 10 ppm (> 99%) par rapport à sa teneur initiale d'environ 1400 ppm. De plus, simplement en utilisant la technique d'adsorption, on a réduit les impuretés élémentaires de Pb et de Zn en dessous de leurs niveaux de détection (< 0.050, 5.00 ppm, respectivement), et As était réduit en dessous de son niveau de quantification (< 0.375 ppm). Une adaptation attentive de la procédure peut être d'une grande importance pour permettre la production à plus grande échelle des sels de manganèse d'une grande pureté.

A green production process of electrolytic manganese metal based on solvent extraction

A Novel Circulation Process to Effectively Produce Electrolytic Manganese Metal (EMM) with Low-Grade Manganese Oxide Ores and High-Sulfur Manganese Ores

Electrodeposition of Manganese Metal and Co-production of Electrolytic Manganese Dioxide Using Single-membrane Double-chamber Electrolysis

A novel electrochemical deintercalation for magnesium ions separation and purification in manganese metallurgy

Enhanced manganese leaching from electrolytic manganese residue by electrochemical process and Na2SO3

Highly efficient Mn2+, Mg2+, and NH4+ recovery from electrolytic manganese residue via leaching, solvent extraction, coprecipitation, and atmospheric oxidation

Efficient and clean manganese electrowinning in an anion-exchange membrane electrolyzer by pulse current electrodeposition method

An Environmentally Friendly Approach for the Extraction and Recovery of Mn from Pyrolusite by Ammonium Sulfate Roasting‐water Leaching and Ammonium Carbonate Precipitation

Insight into mechanisms of Mn and NH 4 + -N removal with recovery of Mn and Mg from electrolysis manganese residue (EMR): Effect of humus and NaOH

Electrochemical processing of the active mass of spent manganese-zinc chemical current sources

Complete recovery of valuable metals from chlorinated titanium-white waste acids: Focus on solvent extraction for recovery and preparation of battery-grade manganese sulfate (MnSO 4 ·H 2 O) from lab to pilot scale

Nucleation crystallization pelleting process for highly efficient manganese ion recovery in electrolytic manganese wastewater

Process intensification in the extraction of Mn from spent Li-ion battery simulated leachate via (G1/W+G2)/O microdispersion system with phase inversion

Preparation of high-purity manganese sulfate and removal of unwanted metal ions using resin-based purification

Clean Stepwise Extraction of Valuable Components from Electrolytic Manganese Residue via Reducing Leaching–Roasting

Recovery and Utilization of Lead in Lead–Containing Waste Residue from Electrolytic Manganese Production

Enhanced removal of Pb from electrolytic manganese anode slime and preparation of chemical MnO 2

Solidification/stabilization and separation/extraction treatments of environmental hazardous components in electrolytic manganese residue: A review

Recycling of Li-Ion Batteries from Industrial Processing: Upscaled Hydrometallurgical Treatment and Recovery of High Purity Manganese by Solvent Extraction

Enhanced removal of Mn2+ and NH4+-N in electrolytic manganese metal residue using washing and electrolytic oxidation

Selective dissolution and re-precipitation by pH cycling enables recovery of manganese from surface nodules