Abstract:Monometallic Ni, Pd and Pt and bimetallic catalysts formed by combinations of the above metals supported on SBA-15 silica were synthesized, characterized and tested in the hydrodeoxygenation reaction of anisole. The objective of the work was to detect the effect of the nature of metals on the activity of the catalysts at different steps of anisole hydrodeoxygenation: hydrogenation of the aromatic ring of anisole and C–O bond cleavage in the intermediate cyclohexyl methyl ether. The support and the catalysts were characterized by N 2 physisorption, X-ray diffraction, UV-vis diffuse reflectance spectroscopy, temperature-programmed reduction, scanning electron microscopy-energy dispersive X-ray spectroscopy, transmission electron microscopy and HAADF-STEM. The catalytic activity tests were carried out in a batch reactor at 280 °C and 7.3 MPa pressure. The activity results show that the NiPd/SBA-15 catalyst had the greatest ability for hydrogenation of the aromatic ring of anisole, while its NiPt/SBA-15 analog resulted in better activity for C–O bond hydrogenolysis. The bimetallic NiPt/SBA-15 catalyst showed the best catalytic performance in the HDO of anisole ascribed to the formation of a Ni–Pt alloy. On the other hand, the combination of Pd and Pt metals in the PdPt/SBA-15 catalyst resulted in the formation of bimetallic particles with Pd-rich and Pt-rich domains, showing high selectivity for the formation of the cyclohexyl methyl ether, which can be useful for the hydrogenation of aromatic rings in O-containing reactants with the formation of saturated O-containing products. According to the characterization results (HAADF-STEM), the different catalytic behavior of NiPd/SBA-15, NiPt/SBA-15, and PdPt/SBA-15 catalysts could be attributed to different characteristics of the bimetallic active phases in them.

What problem does this paper attempt to address?

The problem this paper attempts to address is the catalytic activity and selectivity of catalysts with different properties of metals (Ni, Pd, Pt, and their bimetallic combinations) supported on SBA-15 type materials in the deoxygenation reaction of cresol. Specifically, the research aims to investigate the effect of metal properties on catalytic activity in different steps of cresol deoxygenation, including the hydrogenation of the cresol aromatic ring and the C-O bond cleavage of the intermediate cyclohexyl methyl ether. The main background of the paper is the annual increase in global greenhouse gas emissions, particularly carbon dioxide emissions from fossil fuel combustion and industrial processes, which has led to severe environmental problems. Therefore, developing alternative energy sources (such as solar, wind, and biomass energy) to reduce greenhouse gas emissions and mitigate environmental issues caused by the over-exploitation of fossil resources has become crucial. Biomass-derived products have the potential to be used in existing infrastructure for the production of energy and chemicals, especially by converting lignocellulosic and non-lignocellulosic biomass into hydrocarbon compounds through various methods (such as carbonization, pyrolysis, gasification, and hydrothermal treatment). However, bio-oil obtained from the fast pyrolysis of lignin cannot be directly used as fuel due to its high viscosity, low calorific value, and high oxygen content. It needs to be upgraded by catalytic hydrodeoxygenation (HDO) to remove oxygen-containing functional groups and improve its quality. To achieve this goal, researchers prepared monometallic and bimetallic catalysts and characterized them in detail using various techniques (such as nitrogen physisorption, X-ray diffraction, UV-Vis diffuse reflectance spectroscopy, temperature-programmed reduction, scanning electron microscopy-energy dispersive X-ray spectroscopy, transmission electron microscopy, and high-angle annular dark-field scanning transmission electron microscopy). Then, the catalytic activity and selectivity of these catalysts in the deoxygenation reaction of cresol were tested in a fixed-bed reactor to evaluate the effect of different metal combinations on catalytic performance.

Hydrodeoxygenation of anisole over SBA-15-supported Ni, Pd, and Pt mono- and bimetallic catalysts: effect of the metal's nature on catalytic activity and selectivity

A comparison of Ni, Pt, and NiPt catalysts supported on SBA-15 in anisole hydrodeoxygenation: Exploring the effect of platinum addition to a nickel catalyst

Metallic nickel supported on mesoporous silica as catalyst for hydrodeoxygenation: effect of pore size and structure

Hydrodeoxygenation of Anisole over Ni/α-Al2O3 Catalyst

An efficient bifunctional Ni-Nb2O5 nanocatalysts for the hydrodeoxygenation of anisole

Bimetallic Niobium-Based Catalysts Supported on SBA-15 for Hydrodeoxygenation of Anisole

Influence of Metallic Promoters on the Performance of Ni/SiO 2 Catalyst in the Hydrodeoxygenation of Anisole

Hydrodeoxygenation of Anisole over Silica-Supported Ni2P, MoP, and NiMoP Catalysts

Catalytic Hydrodeoxygenation of Anisole As Lignin Model Compound over Supported Nickel Catalysts

Ni/Al2O3 Catalysts Derived from Layered Double Hydroxide and Their Applications in Hydrodeoxygenation of Anisole

Effect of Zn on Performance of Ni/SiO2 for Hydrodeoxygenation of Anisole

Boosting the Hydrodeoxygenation Activity and Selectivity of Ni/(M)-SBA-15 Catalysts by Chemical Alteration of the Support

Deoxygenation in Anisole Decomposition over Bimetallic Catalysts Supported on HZSM-5

Hydroisomerization of n-hexadecane over a Pd–Ni2P/SAPO-31 bifunctional catalyst: synergistic effects of bimetallic active sites

Hydrodeoxygenation of Phenolics over Uniformly Dispersed Pt–Ni Alloys Supported by Self–Pillared Zsm–5 Nanosheets

Effects of Indium on Ni/SiO 2 Catalytic Performance in Hydrodeoxygenation of Anisole As Model Bio-Oil Compound: Suppression of Benzene Ring Hydrogenation and C–C Bond Hydrogenolysis

Effects of CeO<sub>2</sub>, TiO<sub>2</sub>, and TiO<sub>2</sub>-CeO<sub>2</sub> Supports on Catalytic Performance of Ni<sub>2</sub>P in Hydrodeoxygenation of Anisole

Hierarchical Mesoporous ZSM-5 Supported Nickel Catalyst for the Catalytic Hydrodeoxygenation of Anisole to Cyclohexane

Mechanism of Hydrodeoxygenation (HDO) in Anisole Decomposition over Metal Loaded Brønsted Acid Sites: Density Functional Theory (DFT) Study

Searching for the optimum Pt loading in bimetallic PtXNi/SBA-15 catalysts for hydrodeoxygenation