Abstract:Galvanized advanced high strength steels (AHSS) will be the most competitive structural material for automotive applications in the next decade. Oxidation of AHSS during the recrystalization annealing process in a continuous galvanizing line to a large extent influences the quality of zinc coating on the final galvanized steel product. For example, formation of oxides of alloying elements (e.g. Mn, Cr, Si) at the steel surface during annealing prior to galvanizing leads to poor adhesion of a zinc coating. Yet, knowledge on the high temperature oxidation behaviour of AHSS is rather limited. The primary aim of this thesis is to provide fundamental understanding on the kinetics of internal oxidation of AHSS during annealing. The classical Wagner internal oxidation theory for binary alloys was extended to account for multi-component alloys. To this end, a generic coupled thermodynamic-kinetic internal oxidation model based on Fick’s 1st law was developed in order to predict the kinetics of internal oxidation, as well as the concentration depth profiles of internal oxides and solute elements in alloy matrix, considering the finite solubility product of oxide precipitates, the non-ideal behaviour of solid solution and the formation of multiple type of oxide species. The internal oxidation behaviour of Fe-Mn and Fe-Mn-Cr steel alloys were experimentally studied to validate the model. It has been found that for Fe-Mn and Fe-Mn-Cr steel alloys, the effect of non-ideal behaviour of solution on internal oxidation is negligible, and local thermodynamic equilibrium is established within internal oxidation zone. Besides, the kinetics of Wustite formation on pure iron and Mn alloyed steels annealed in CO2 + CO or H2O + H2 gas mixtures as well as the reduction kinetics of the Wustite scale in Ar + H2 gas mixtures were investigated. The growth of Wustite scale on iron and Mn alloyed steels follows the linear rate law. However, adding Mn to iron, even at a relatively low concentration (say 1.7 wt%), dramatically lowers the growth rate of Wustite scale. Nevertheless, reduction kinetics of the Wustite scale on iron and Mn alloyed steels are almost the same. During the reduction process a dense iron layer is formed which separates the remaining Wustite scale from the reduction atmosphere. The rate of Wustite reduction by H2 is controlled by the diffusion of solute oxygen dissolved in the formed iron layer.

Nanoscale surface analysis on second generation advanced high strength steel after hot dip galvanizing

Effects of Alloying Elements on Surface Oxides of Hot-Dip Galvanized Press Hardened Steel

Nanoscale Investigation of Microcracks and Grain Boundary Wetting in Press Hardened Galvanized 20MnB8 Steel

In-Situ Wettability Analysis of Al Coating Influence on Hot-Dip Galvanizing Properties of Advanced High-Strength Steels

Challenges in hot-dip galvanizing of high strength dual phase steel: Surface selective oxidation and mechanical property degradation

Hot-dip galvanising behaviours of a CMnSiCr DP780 steel

Selective Oxidation of a Medium-Mn Third Generation Advanced High Strength Steel during Austenitizing and Intercritical Annealing

Changing Oxide Layer Structures with Respect to the Dew Point Prior to Hot-Dip Galvanizing of Δ-Trip Steel

Hot Dip Galvanizing Behavior of Advanced High Strength Steel

Analysis of the delayed cracking mechanism of an industrial hot-dip galvanized DP1180GI steel coil

Oxidation phenomena in advanced high strength steels : Modelling and experiment

Effect of the Interface Microstructure of Hot-Dip Galvanizing High-Strength Automobile Steel on Its Tensile Fracture Behaviors

Thermodynamic Consideration on Selective Surface Oxidation of High Strength Steels Prior to Hot-Dip Galvanizing

Industrial implementation of a next generation advanced high strength steel

Corrosion Behavior of Hot-dip Galvanized Advanced High Strength Steel Sheet in a Simulated Marine Atmospheric Environment

Design Standard and Analysis of Ageing Process in High Co-Ni Secondary Hardening Steel

Effect of Dew Point on the Selective Oxidation and Reactive Wetting of DP980 Steel during Hot‐Dip Galvanizing

Selective Oxidation Behavior of Medium Manganese Steel in Hot-Dip Galvanizing Process

Identification of Surface Selective Oxides on Continuous Annealed Steels

Characterization of surface layers of oxidation-reduction treated Si and Mn added advanced high strength steel

Effect of Hot-Dip Galvanizing Process on Selective Oxidation and Galvanizability of Medium Manganese Steel for Automotive Application