Abstract:In recent years, the research of hybrid composites reinforced by multiple reinforcements has received increasing attention because these composites have great potential to be tailored for various applications. In the present work, hybrid aluminum (Al) matrix composites reinforced with SiC particles and carbon fibers (SiCp-Cfs/Al composites) were fabricated by the colloidal dispersion and suction filtration method. It was found that SiCp-Cfs/Al composites had a dense structure and the carbon fibers and SiC particles were uniformly distributed in the Al matrix. The mechanical properties of SiCp-Cfs/Al composites with different reinforcement volume fractions were investigated. The results showed that the SiCp-Cfs/Al composites exhibited high tensile strength and elastic modulus (tensile strength 207 MPa and elastic modulus 92 GPa) when the volume fraction of SiC particles was 5% and the volume fraction of carbon fiber was 7%, which were significantly higher than that of SiCp/Al composites with 5% volume fraction of SiC particles (tensile strength 112 MPa and elastic modulus 80 GPa). The homogeneous distribution of carbon fibers and SiC particles in the Al matrix, which serves as co-reinforcing, is responsible for the high tensile strength and elastic modulus of SiCp-Cfs/Al composites. The coefficient of thermal expansion (CTE) of SiCp/Al composites and SiCp-Cfs/Al composites were measured at temperatures ranging from 25 °C and 400 °C. The results showed that the addition of carbon fibers caused the CTE of SiCp-Cfs/Al composites to be much lower than that of SiCp/Al composites.

In-plane thermal expansion behavior of dense ceramic matrix composites containing SiBC matrix

Thermal Expansion Behavior of Carbon Fiber Reinforced Chemical-Vapor-infiltrated Silicon Carbide Composites from Room Temperature to 1400 °C

EFFECTS OF HEAT TREATMENT ON THERMAL EXPANSION OF 3D C/SiC COMPOSITES

Effects of interphases on thermal expansion of 3D-C/SIC composites

Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior

Thermal residual stress in continuous SiC fiber reinforced titanium matrix composites

Bending and Thermal Expansion Properties of 3D-C_f/sic Composites

The Thermal Expansion Behaviour of SiCp/Al–20Si Composites Solidified under High Pressures

Influence of Reinforcement with Multimodal Distribution on Thermophysical Properties and Fracture Behavior in Al-Si/SiC Composites Infiltrated under Super-Gravity Field

A multiscale modeling for predicting the thermal expansion behaviors of 3D C/SiC composites considering porosity and fiber volume fraction

High-temperature thermal expansion behaviour of C/SiC studied using an in-situ optical visualisation method and numerical simulations in a quartz lamp array heating environment

Effects of interfacial residual stress on mechanical behavior of SiCf/SiC composites

Abnormal mechanical hysteresis behavior of Tyranno-ZMI SiC/SiC containing Ti3Si(Al)C2

Mechanical and thermal expansion behavior of hybrid aluminum matrix composites reinforced with SiC particles and short carbon fibers

The structural effect of SiC form ceramic on the compressive strength and thermal expansion properties of Cu–SiC composites

Improving mechanical and thermal expansion properties of aluminum matrix composites reinforced by silicon carbide fiber

EFFECTS OF FABRIC ARCHITECTURES ON THE THERMAL EXPANSION COEFFICIENT AND THE THERMAL DIFFUSIVITY OF CARBON FIBER REINFORCED SILICON CARBIDE COMPOSITES

Effect of SiC content on the mechanical behaviour of a three-dimensional needled C/SiC composite

Experimental and Numerical Analysis of the Thermal Conductivity of SiCf/SiC Composites

Effect of thermal residual stress on the tensile properties and damage process of C/SiC composites at high temperatures

Micromechanics-based thermal expansion characterization of SiC nanoparticle-reinforced metal matrix nanocomposites