Experimental and Numerical Analysis of the Thermal Conductivity of SiCf/SiC Composites

Zhaoguo Mi,Zhenhua Chen,Weihua Yang
DOI: https://doi.org/10.1155/2023/6522013
IF: 2.0981
2023-05-01
Advances in Materials Science and Engineering
Abstract:SiC fiber-reinforced silicon matrix (SiCf/SiC) composites are of significant interest for the aircraft engine. The thermal conductive behaviors of [0-90-0]s SiCf/SiC composites along in-plane and out-of-plane (thickness) directions were reported in this paper. The thermal conductivity of the SiCf/SiC composite was tested by using the steady-state measuring apparatus. Then, the thermal conductivity of the SiC matrix was predicted by finite element analysis (FEA). The representative volume element (RVE) models of SiCf/SiC composites were built, and FEA was used to investigate thermal conductive behaviors. It was found that the thermal conductivity along the fiber radial direction was greater than it was in the axial direction in the SiCf/SiC composite and that the thermal conductivity of the out-of-plane direction is lower than that of the in-plane one. The thermal conductivity of the SiCf/SiC composite in the in-plane direction at room temperature was 31.1 Wm−1K−1 and 28.5 Wm−1K−1, and the thermal conductivity in the thickness direction was 24.9 Wm−1K−1. The experimental thermal conductivity showed a good agreement with the thermal conductivity of FEA.
materials science, multidisciplinary
What problem does this paper attempt to address?
This paper aims to solve the problem of the thermal conductivity characteristics of SiC fiber - reinforced SiC matrix composites (SiC_f/SiC) in different directions. Specifically, the research focuses on the in - plane and out - of - plane heat conduction behaviors of this composite. Due to the wide application of SiC_f/SiC composites in aerospace, nuclear energy and other fields, the accurate evaluation of their thermal conductivity is of great significance for understanding and designing these composites. The paper mentions that the thermal conductivity of SiC_f/SiC composites is anisotropic, which is mainly caused by their fiber structure. In order to study this anisotropic thermal conductivity, the author used a steady - state measurement device for experiments and predicted the thermal conductivity of the SiC matrix through finite element analysis (FEA). In addition, a representative volume element (RVE) model was also constructed to further study the heat conduction behavior. By comparing the experimental and numerical simulation results, the feasibility of the method combining experiment and numerical simulation in predicting the thermal conductivity of SiC_f/SiC composites was verified. The research results show that at room temperature, the in - plane thermal conductivity of SiC_f/SiC composites is 31.1 Wm\(^{-1}\)K\(^{-1}\) and 28.5 Wm\(^{-1}\)K\(^{-1}\), while the out - of - plane thermal conductivity is 24.9 Wm\(^{-1}\)K\(^{-1}\). There is a good agreement between the experimentally measured thermal conductivity and the FEA simulation results. In general, this paper solves the problem of how to accurately evaluate the thermal conductivity of SiC_f/SiC composites in different directions through the method of combining experiment and numerical simulation, which has important guiding significance for the application of this material.