Abstract:Black polymer films with high thermal stability are highly desired in flexible electrical and electronic fields. Conventional black polymer films based on high-temperature resistant polymers and black inorganic dyes are usually suffered from the poor electrical and tensile properties. In the current work, a series of intrinsically black polyimide (BPI) films with International Commission on Illumination (CIE) Lab optical parameters close to zero and high thermal stability have been designed and prepared. For this purpose, an electron-rich aromatic diamine, 4,4′-iminodianiline (NDA), was copolymerized with 1,4-phenylenediamine (PDA) and 3,3′,4,4′-biphenyltetracarboxylic dianhydride (sBPDA) to afford a series of poly(amic acid) (PAA) solutions, which were then thermally dehydrated to provide the final BPI films at elevated temperatures up to 400 °C in air. The molar fraction of NDA in the total diamine monomers was 0 for BPI-0 (sBPDA-PDA), 10% for BPI-1, 20% for BPI-2, 30% for BPI-3, 40% for BPI-4, 50% for BPI-5, and 100% for BPI-6. For comparison, two referenced polyimide (PI) films, including PI-ref1 and PI-ref2, were prepared according to a similar procedure. The former was derived from pyromellitic dianhydride (PMDA) and 4,4′-oxydianiline (ODA) and the latter was from PMDA and NDA. The BPI films exhibited an increasing degree of blackness with the increasing contents of NDA units in the polymer films. For example, the BPI-6 (sBPDA-NDA) film exhibited the optical transmittance of 1.4% at a wavelength of 650 nm (T650), which was obviously lower than those of PI-ref1 (T650 = 74.6%) and PI-ref2 (T650 = 3.6%). In addition, the BPI-6 film showed the CIE Lab parameters of 0.39 for L*, 2.65 for a*, 0.66 for b*, and haze of 1.83, which was very close to the criterion of "pure blackness" for polymer films (L* = a* = b* = 0). At last, incorporation of the NDA units in the rigid-rod BPI-0 (BPDA-PDA) film slightly deteriorated the high-temperature dimensional stability of the derived BPI films. BPI-6 film showed a linear coefficient of thermal expansion (CTE) value of 34.8 × 10−6/K in the temperature range of 50 to 250 °C, which was higher than those of the BPI-0 (CTE = 12.3 × 10−6/K), PI-ref1 (CTE = 29.5 × 10−6/K), and PI-ref2 (CTE = 18.8 × 10−6/K) films. Nevertheless, the BPI films maintained good thermal stability with the 5% weight loss temperatures (T5%) higher than 590 °C, and the glass transition temperatures (Tg) higher than 340 °C.

Design, synthesis, and properties of soluble intrinsic black polyimide bearing tetraphenylcyclopentadienone units

Rational design of soluble intrinsic black polyimide containing tetraphenylcyclopentadienone-based chromophore

Synthesis and Characterization of Polyimide with High Blackness and Low Thermal Expansion by Introducing 3,6-bis(thiophen-2-yl)diketopyrrolopyrrole-Based Chromophores

High-performance black polyimide with improved solubility for flexible printed circuit boards

Intrinsically Black Polyimide with Retained Insulation and Thermal Properties: A Black Anthraquinone Derivative Capable of Linear Copolymerization

Preparation and Properties of Intrinsically Black Polyimide Films with CIE Lab Color Parameters Close to Zero and High Thermal Stability for Potential Applications in Flexible Printed Circuit Boards

Molecular Design, Synthesis and Characterization of Intrinsically Black Polyimide Films with High Thermal Stability and Good Electrical Properties

New Developments in Intrinsic Black Photosensitive Polyimide for Advanced Display Applications

Preparation and Properties of Inherently Black Polyimide Films with Extremely Low Coefficients of Thermal Expansion and Potential Applications for Black Flexible Copper Clad Laminates

Intrinsically Negative Photosensitive Polyimides with Enhanced High-Temperature Dimensional Stability and Optical Transparency for Advanced Optical Applications via Simultaneous Incorporation of Trifluoromethyl and Benzanilide Units: Preparation and Properties

Synthesis of Novel Biphenyl‐fused Alicyclic Tetracarboxylic Dianhydride and Its Performance in Thermostable and Transparent Colorless Polyimides

Microwave-assisted Synthesis of High Thermal Stability and Colourless Polyimides Containing Pyridine

Synthesis and Properties of Soluble Transparent Polyimides Containing Tert-Butyl and Isobutyl Groups

Synthesis and Characterization of Polyimides from 4,4′-(3-(tert-butyl)-4-aminophenoxy)diphenyl Ether

High-performance transmissive-to-black electrochromism derived from diphenylamine-based polyimides with tetraphenylethylene as bridging units

Solubility, Thermal and Photoluminescence Properties of Triphenyl Imidazole-Containing Polyimides.

Multifunctional Polyimides by Direct Silyl Ether Reaction of Pendant Hydroxy Groups: Toward Low Dielectric Constant, High Optical Transparency and Fluorescence

Soluble And Transparent Polyimides With High T-G S From A New Semi-Aliphatic Diamine With Cyclohexyl And Ortho-Methyl Groups

Synthesis and properties of novel colorless and thermostable polyimides containing cross‐linkable bulky tetrafluorostyrol pendant group and organosoluble triphenylmethane backbone structure

Synthesis of colorless polyimides derived from benzimidazole diamines with bis‐amide structures

Synthesis and Characterization of Poly(pyridine–imide)s with Tert-Butyl Substituents