Abstract:Herein a semi-aliphatic diamine 4,4 '-(cyclohexylmethylene)bis(2-methylaniline) (CHMBMA) with a pendant cyclohexyl and two ortho-substituted methyl groups is synthesized from o-toluidine and cyclohexanecarbaldehyde by Mannich and rearrangement reactions. Then CHMBMA is polycondensed with five commercial aromatic dianhydrides by the high-temperature one-step method with the thermal imidization to produce a series of polyimides (PIs, PI-H(1-5)). The weight-averaged molecular weights (M (w)s) of PI-H(1-5) are in the range from 9.08 x 10(4) to 27.48 x 10(4) g mol(-1) with the polydispersity indices (PDI) from 3.29 to 6.13 by gel permeation chromatography (GPC) measurement. They are soluble in common organic solvents (such as THF, CHCl3 etc.) and can form transparent, tough films with light-color (Thickness: 20-26 mu m) by the solution-casting method. The light transmittance of them is above 80% in the visible range from 400 to 760 nm. They exhibit excellent mechanical properties with tensile strength from 72.2 to 97.06 MPa and tensile modulus from 0.9 to 1.9 GPa. Furthermore, they also display low water absorption rates (<2.5%), good thermal stability (5% weight loss temperatures (T (5%)) in the range from 466 to 480 degrees C under N-2 atmosphere and high glass transition temperatures (T (g)s >= 319 degrees C). As comparison, we also synthesize these PIs (PI-L(1-5)) by the low-temperature two-step method with the chemical imidization. The M (w)s of PI-L(1-5) are lower than those of PI-H(1-5), but the film color of PI-L(1-5) is relatively lighter than the corresponding one of PI-H(1-5). In summary, the introduction of cyclohexyl and ortho-substituted methyl groups into the backbone can improve the solubility of PIs and the transparency of their corresponding films without reducing their T (g)s.

Cardo polyimides with high Tg and transparency derived from bisphenol fluorenes and 1,4-bis(4-fluorophthalimide)cyclohexanes via aromatic nucleophilic substitution

Organosoluble and Transparent Cardo Polyimides with High T-g Derived from 9,9-Bis(4-aminophenyl)xanthene

Soluble and Transparent Polyimides with High Tg from a New Diamine Containing Tert‐butyl and Fluorene Units

Facile Synthesis of Acyloxy-Containing Fluorene-Based Cardo Polyimides with High Optical Transparency, Fluorescence and Low Dielectric Constant

High Optical Transparency, Low Dielectric Constant and Light Color of Organosoluble Fluorinated Polyimides Based on 10,10-Bis[4-(4-amino-3-trifluoromethylphenoxy)phenyl]-9(10h)-anthrone

High Performance Transparent Polyimides by Controlling Steric Hindrance of Methyl Side Groups

Intrinsic Low-Dielectric Cardo Polyimide with High Heat Resistance, High Transparency, and Low Birefringence

Soluble And Transparent Polyimides With High T-G S From A New Semi-Aliphatic Diamine With Cyclohexyl And Ortho-Methyl Groups

Synthesis and Properties of Optically Transparent Fluoro-Containing Polyimide Films with Reduced Linear Coefficients of Thermal Expansion from Organo-Soluble Resins Derived from Aromatic Diamine with Benzanilide Units

Super-heat resistant, transparent and low dielectric polyimides based on spirocyclic bisbenzoxazole diamines with <i>T</i><sub>g</sub> > 450 C

Super-heat resistant, transparent and low dielectric polyimides based on spirocyclic bisbenzoxazole diamines with Tg > 450 °C

Highly Soluble Diphenylfluorene‐based Cardo Copolyimides Containing Perylene Units

Organo-soluble and transparent polyimides containing phenylphosphine oxide and trifluoromethyl moiety: Synthesis and characterization

Synthesis and properties of fluorinated polyimides from 1,1-bis(4-amino-3,5-dimethylphenyl)-1-(3,4,5-trifluorophenyl)-2,2,2-trifluoroethane and various aromatic dianhydrides

Synthesis and properties of novel colorless and thermostable polyimides containing cross‐linkable bulky tetrafluorostyrol pendant group and organosoluble triphenylmethane backbone structure

Synthesis and Properties of Cost-Effective Light-Color and Highly Transparent Polyimide Films from Fluorine-Containing Tetralin Dianhydride and Aromatic Diamines

Synthesis and properties of polyimides from a diamine containing side diphenylphosphine oxide and trifluoromethyl groups

Synthesis and Characterization of Highly Optical Transparent and Low Dielectric Constant Fluorinated Polyimides

Synthesis and Characterization of Polyimides from 4,4′-(3-(tert-butyl)-4-aminophenoxy)diphenyl Ether

Synthesis of Novel Biphenyl‐fused Alicyclic Tetracarboxylic Dianhydride and Its Performance in Thermostable and Transparent Colorless Polyimides

Heat‐resistant and transparent polyimides derived from alicyclic dianhydrides and phthalazinone‐based diamine