Abstract:A coupled thermo-metallo-mechanical model is proposed to analyse the temperature, stress and microstructure fields in multi-pass welding of P92 pipes. An axisymmetric model is adopted to increase the efficiency of the simulation. To preserve the temperature field from a three-dimensional (3D) analysis, a procedure is proposed to convert the 3D result into a two-dimensional (2D) form, which is compared to temperature fields created by other 2D heat transfer analyses. A metallurgical algorithm, which does not need the calibration with metallurgical experiments, is implemented in the finite element (FE) analysis to predict spatial distributions of product phases during multi-pass welding. Comparison between the predictions and the metallurgical graphs is made to verify the effectiveness of the metallurgical analysis after twenty thermal cycles. Hardness test is also employed to characterize the microstructure and to validate the metallurgical predictions. Five temperature fields, one created from the newly proposed approach and four from existent ones, are used as external loads to conduct the mechanical analysis. The volumetric change due to the phase transformation is considered as an extra volumetric strain, which is implemented by user subroutine. The stress distributions predicted using the five temperature fields are plotted together with the 3D stress result to examine the effectiveness of the developed procedure. The stress at the external surface of the pipe is measured by the X-ray diffraction technique, and is further compared to the stress predictions. The advantage of the model is demonstrated by comparing the computational time consumed in the mechanical analysis.

Temperature effects on the resistance capacity of API X60 pipe elbow under bending moment using X-FEM method

Damage analysis in welded steel pipe elbow under strong cyclic loading

Study of plastic limit load of the combined fittings of double elbows under in-plane bending moment

Finite Element Analysis on the Mechanical Properties of the Combined Fittings With a Long Radius and Double Elbows

Mechanical Behavior of Steel Pipe Bends: An Overview

Resistance mechanism of partially embedded pipelines considering the influence of temperature fields

Effect of Welding Defects on Mechanical Properties of Welded Joints Subjected to Temperature

Theoretical Study on Upheaval Buckling of Subsea Pipelines with Temperature-Dependent Thermal Properties at Different Carbon Contents

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

An Analysis on the Safety Performance of the Combined Fittings of Straight Tees and Long Radius Elbows

Mechanical Properties of Butt Weldments Made with Q345B Steel and E5015 Electrodes at Different Temperatures

Thermal-Mechanical Fatigue Behavior of P92 T-Piece Pipe

The Effect of Heat Treatment Parameters on the Mechanical and Microstructural Properties of an ASTM A860 WPHY 65 Pipe Fitting: An Experimental Investigation

Impact of Hot Bending on the High-Temperature Performance and Hydrogen Damage of 2.25Cr-1Mo-0.25v Steel

Moment-rotation relations of concrete filled steel tube column connections at high temperatures

Limit and Shakedown Analysis of 45-Degree Piping Elbows under Internal Pressure and In-Plane Bending

Assessment by finite element modelling of the mechano-electrochemical interaction at corrosion defect on elbows of oil/gas pipelines

Research on the influencing factors of small bending radius elbow stamping based on CAE simulation

Finite element analyses of buckling behavior in x60 steel pipelines under axial compression load

Bending Capacity of Corroded Pipeline Subjected to Internal Pressure and Axial Loadings

Analysis and simulation on fracture of structural steel at elevated temperatures based on extended finite element method