Abstract:Abstract This paper establishes a finite element model of stamping and forming and proposes solution algorithms for static and dynamic forces. The finite element simulation of the hot stamping process is carried out to analyze the thermophysical parameters of BR1500HS ultra-high-strength steel sheet material and H13 steel mold material. Set the temperatures of austenitic material in the transfer process and molding process, obtain the rheological stress data of BR1500HS ultra-high-strength steel plate during plastic deformation at high temperature, and determine the basic mechanical properties of the material at high temperature. A geometric finite element model of thermal-force-phase coupling of the hot stamping and forming process is established to simulate the temperature field change of the steel plate during the hot stamping and forming process by combining the process conditions and process parameters. At the same time, the ultra-high-strength boron steel 22MnB5 is selected to simulate the hot forming and tempering process of U-shaped parts made of high-strength steel sheet material, and the feasibility of the finite element model is verified. Different hot stamping process parameters are set to analyze the forming quality of both BR1500HS ultra-high strength steel and ultra-high-strength boron steel 22MnB5. When the stamping speed is increased from 50mm/s to 100mm/s, the maximum equivalent force of BR1500HS ultra-high strength steel decreases, and thus, when the stamping speed is 100mm/s and the holding time is 5s, the part forming performance is better, which meets the requirements of the gradient performance hot stamping process.

Research on the influencing factors of small bending radius elbow stamping based on CAE simulation

Process of Push Bending Elbows and Its Parameters CAD System

Study on the Effects of Forming Parameters on the Plastic Flow of Axisymmetrical Curved Parts in Stamping Process

Influence of Process Parameters on Thinning Ratio and Fittability of Bellows Hydroforming

Research on Bending Forming Method of Large Diameter-Thickness Ratio Thin-Walled Tubes for Aerospace

Finite Element Analysis on the Mechanical Properties of the Combined Fittings With a Long Radius and Double Elbows

Design and Analysis of Cold Stamping Process for the Car Transverse Reinforcing Beam

Research on influence factors of forming force in medium-thick sheet metal extrusion process

Finite element analysis on stamping car cradle with local thickening

FEM model optimization study of mechanical properties and material selection in stamping process

Research on Formability of Tailor-welded Blanks with Different Thickness in Door Inner Stamping

Study on the influences of geometrical parameters on the formability of stretch curved flanging by numerical simulation

Finite Element Analysis and Design in Stainless Steel Sheet Forming and Its Experimental Comparison

Numerical Research on High-Strength Rectangular Section Steel Tube in Rotary-Draw Bending

Effect of process parameters on the deep drawing formability of aluminum and advanced high-strength steel square cups

Research on the Mechanism and Processability of Roll Forming

A Study on the Optimization of Joint Mandrel Shape for Manufacturing Long Type Elbow Using Push Bending Process

Numerical Analysis of Stretch-Bend Forming Precision of Aluminum Extrusion with Unequal Section

Reaearch of finite element modeling & experiment of the die structure for high-strength steel sheet metal stamping

FEM Simulation of Metal Drawing Parts Forming Based on the ABAQUS Software

Design and Analysis of Cold Stamping Process for the Car Beam Left/Right Section