Abstract:The main objective of this paper is to study the behaviour and design of high strength steel columns at elevated temperatures using finite element analysis. In this study, equations predicting the yield strength and elastic modulus of high strength steel and mild steel at elevated temperatures are proposed. In addition, stress–strain curve model for high strength steel and mild steel materials at elevated temperatures is also proposed. The numerical analysis was performed on high strength steel columns over a range of column lengths for various temperatures. The nonlinear finite element model was verified against experimental results of columns at normal room and elevated temperatures. The effects of initial local and overall geometrical imperfections have been taken into consideration in the analysis. The material properties and stress–strain curves at elevated temperatures used in the finite element model were obtained from the proposed equations based on the material tests. Two series of box and I-section columns were studied using the finite element analysis to investigate the strength and behaviour of high strength steel columns at elevated temperatures. Both fixed-ended stub columns and pin-ended slender columns were considered. The column strengths predicted from the finite element analysis were compared with the design strengths predicted using the American, European and Australian specifications for hot-rolled steel columns at elevated temperatures by substituting the reduced material properties. In addition, the direct strength method, which was developed for the design of cold-formed steel columns at normal room temperature, was also used in this study to predict the high strength steel column strengths at elevated temperatures. The suitability of these design rules for high strength steel columns at elevated temperatures is assessed. Generally, it is shown that the American and European specifications as well as the direct strength method conservatively predicted the column strengths of high strength steel at elevated temperatures. The European Code predictions are slightly more conservative than the American Specification and the direct strength method predictions.

Moment-rotation relations of concrete filled steel tube column connections at high temperatures

Effects of high temperatures on the stiffness of concrete-filled steel tubular column-to-steel beam connections

Impact Behaviours Of Concrete-Filled Steel Tubular Stub Column At Elevated Temperatures

Tests on Impact Behaviour of Micro-Concrete-filled Steel Tubes at Elevated Temperatures Up to 400°C

Simplified Calculation Methods of Connections to Concrete-Filled Steel Tubular Columns at Elevated Temperatures

EXPERIMENTAL INVESTIGATION AND NONLINEAR FINITE ELEMENT ANALYSIS ON THE BEHAVIOR OF CONCRETE-FILLED SQUARE STEEL TUBULAR COLUMN CONNECTIONS

MECHANICAL BEHAVIOR AND FAILURE MECHANISM OF EXTENDED ENDPLATE CONNECTIONS TO SQUARE STEEL TUBULAR COLUMNS AT HIGH TEMPERATURE

Nonlinear FEM Analysis of Steel Beam-to-Concrete Filled Steel Square Tube Column Connections with External Stiffening Rings

Residual Strength of Concrete Filled RHS Stub Columns after Exposure to High Temperatures

Entire loading procedure analysis of concrete-filled steel tube column to steel beam joints under fire

Design of high strength steel columns at elevated temperatures

Behaviour of Cold-Formed Stainless Steel Beams at Elevated Temperatures

Concrete Filled Steel Tube Stub Columns under Combined Temperature and Loading

Experimental and Numerical Study of Temperature Developments of Composite Joints Between Concrete-Encased Concrete-Filled Steel Tube Columns and Reinforced Concrete Beams

Flexural behavior of concrete-filled double-skin steel tubular beams after subject to high temperature

Elasto-Plastic Analysis of Concrete-Filled Circular Steel Tubular Stub Columns after Exposed to High Temperatures

FINITE ELEMENT ANALYSIS ON THE TEMPERATURE FIELD OF CONCRETE FILLED STEEL TUBULAR COLUMN-BEAM JOINTS IN FIRE

Bearing Capacities and Compressive Behavior of Concrete Filled Square Steel Tubular Stub Columns after High Constant Temperatures

The lateral impact performance of concrete-filled steel tubular (CFST) members at high temperatures

Behavior of Steel Beam to Concrete-Filled Steel Tubular Column Connections after Exposure to Fire

Analytical Model of Moment-Rotation Relation for Steel Beam to CFST Column Connections with Bidirectional Bolts