Abstract:The main objective of this paper is to study the behaviour and design of high strength steel columns at elevated temperatures using finite element analysis. In this study, equations predicting the yield strength and elastic modulus of high strength steel and mild steel at elevated temperatures are proposed. In addition, stress–strain curve model for high strength steel and mild steel materials at elevated temperatures is also proposed. The numerical analysis was performed on high strength steel columns over a range of column lengths for various temperatures. The nonlinear finite element model was verified against experimental results of columns at normal room and elevated temperatures. The effects of initial local and overall geometrical imperfections have been taken into consideration in the analysis. The material properties and stress–strain curves at elevated temperatures used in the finite element model were obtained from the proposed equations based on the material tests. Two series of box and I-section columns were studied using the finite element analysis to investigate the strength and behaviour of high strength steel columns at elevated temperatures. Both fixed-ended stub columns and pin-ended slender columns were considered. The column strengths predicted from the finite element analysis were compared with the design strengths predicted using the American, European and Australian specifications for hot-rolled steel columns at elevated temperatures by substituting the reduced material properties. In addition, the direct strength method, which was developed for the design of cold-formed steel columns at normal room temperature, was also used in this study to predict the high strength steel column strengths at elevated temperatures. The suitability of these design rules for high strength steel columns at elevated temperatures is assessed. Generally, it is shown that the American and European specifications as well as the direct strength method conservatively predicted the column strengths of high strength steel at elevated temperatures. The European Code predictions are slightly more conservative than the American Specification and the direct strength method predictions.

Behaviour of Cold-Formed Stainless Steel Beams at Elevated Temperatures

Design of Cold-Formed Stainless Steel RHS and SHS Beam–columns at Elevated Temperatures

Design of high strength steel columns at elevated temperatures

BEHAVIOUR OF HIGH STRENGTH COLD-FORMED STEEL COLUMNS UNDER ELEVATED TEMPERATURES

Behaviour of constructional stainless steel at elevated temperatures

Cold-formed steel lipped channel columns at elevated temperatures

Behavior of High Strength Structural Steel at Elevated Temperatures

Experimental investigation of cold-formed steel material at elevated temperatures

Deterioration of Mechanical Properties of Novel Constructional Steel Material at Elevated Temperatures

Effect of High Temperature Exposure and Strain Rate on Mechanical Properties of High-Strength Steel Rebars

Stress–strain curves for stainless steel at elevated temperatures

Numerical Analysis for Behavior of Stainless-Steel Web Cleat Connections at Elevated Temperatures

Corner Properties Of Cold-Formed Steel Sections At Elevated Temperatures

Design of Austenitic and Duplex Stainless Steel SHS and RHS Beam-Columns

Numerical investigation and design of aluminium alloy channel section columns at elevated temperatures

Moment-rotation relations of concrete filled steel tube column connections at high temperatures

Material Tests of 316L Austenitic Stainless-Clad Steel at Elevated Temperatures

Experimental Study on the Deformation Behavior of Symmetric Stainless Steel I-Beams

Finite Element Analyses of Cold‐formed Stainless Steel Beam with Web Openings in Shear

Numerical simulation of steel-concrete composite beams and slabs at elevated temperatures

Examination of the Behavior of Double Cold-Formed Steel Columns with Σ-Shaped Sections Subjected to Non-Uniform Temperature Conditions