Abstract:The main objective of this paper is to study the behaviour and design of high strength steel columns at elevated temperatures using finite element analysis. In this study, equations predicting the yield strength and elastic modulus of high strength steel and mild steel at elevated temperatures are proposed. In addition, stress–strain curve model for high strength steel and mild steel materials at elevated temperatures is also proposed. The numerical analysis was performed on high strength steel columns over a range of column lengths for various temperatures. The nonlinear finite element model was verified against experimental results of columns at normal room and elevated temperatures. The effects of initial local and overall geometrical imperfections have been taken into consideration in the analysis. The material properties and stress–strain curves at elevated temperatures used in the finite element model were obtained from the proposed equations based on the material tests. Two series of box and I-section columns were studied using the finite element analysis to investigate the strength and behaviour of high strength steel columns at elevated temperatures. Both fixed-ended stub columns and pin-ended slender columns were considered. The column strengths predicted from the finite element analysis were compared with the design strengths predicted using the American, European and Australian specifications for hot-rolled steel columns at elevated temperatures by substituting the reduced material properties. In addition, the direct strength method, which was developed for the design of cold-formed steel columns at normal room temperature, was also used in this study to predict the high strength steel column strengths at elevated temperatures. The suitability of these design rules for high strength steel columns at elevated temperatures is assessed. Generally, it is shown that the American and European specifications as well as the direct strength method conservatively predicted the column strengths of high strength steel at elevated temperatures. The European Code predictions are slightly more conservative than the American Specification and the direct strength method predictions.

Deterioration of Mechanical Properties of Novel Constructional Steel Material at Elevated Temperatures

Behavior of High Strength Structural Steel at Elevated Temperatures

Experimental investigation of cold-formed steel material at elevated temperatures

Effect of High Temperature Exposure and Strain Rate on Mechanical Properties of High-Strength Steel Rebars

Behaviour of constructional stainless steel at elevated temperatures

Experimental study of the mechanical properties of prestressed steel wire at elevated temperatures

Experimental Studies on the Properties of Constructional Steel at Elevated Temperatures

Stress–strain curves for stainless steel at elevated temperatures

Mechanical properties of high-strength Q960 steel at elevated temperature

Design of high strength steel columns at elevated temperatures

Experimental Investigation On Mechanical Properties Of Q235b Hot-Rolled Structure Steel At Elevated Temperatures

Corner Properties Of Cold-Formed Steel Sections At Elevated Temperatures

Experimental Research on Mechanical Properties of Domestic High Strength Steel Q550 at Elevated Temperatures

Mechanical properties and modelling of superior high-performance steel at elevated temperatures

Material Tests of 316L Austenitic Stainless-Clad Steel at Elevated Temperatures

High-Temperature Mechanical Properties of Artificially Simulated Corroded Q500MC Structural Steel

Effect of Welding Defects on Mechanical Properties of Welded Joints Subjected to Temperature

Mechanical Performance of Artificially Rusted Q500MC Structural Steel Subjected to High Temperature

Elevated Temperature Material Degradation of Cold-Formed Steels under Steady- and Transient-State Conditions

10.17: Mechanical Properties of High Strength Q690 Steel at Elevated Temperatures

Physical Properties of High-Strength Bolt Materials at Elevated Temperatures