Abstract:The main objective of this paper is to study the behaviour and design of high strength steel columns at elevated temperatures using finite element analysis. In this study, equations predicting the yield strength and elastic modulus of high strength steel and mild steel at elevated temperatures are proposed. In addition, stress–strain curve model for high strength steel and mild steel materials at elevated temperatures is also proposed. The numerical analysis was performed on high strength steel columns over a range of column lengths for various temperatures. The nonlinear finite element model was verified against experimental results of columns at normal room and elevated temperatures. The effects of initial local and overall geometrical imperfections have been taken into consideration in the analysis. The material properties and stress–strain curves at elevated temperatures used in the finite element model were obtained from the proposed equations based on the material tests. Two series of box and I-section columns were studied using the finite element analysis to investigate the strength and behaviour of high strength steel columns at elevated temperatures. Both fixed-ended stub columns and pin-ended slender columns were considered. The column strengths predicted from the finite element analysis were compared with the design strengths predicted using the American, European and Australian specifications for hot-rolled steel columns at elevated temperatures by substituting the reduced material properties. In addition, the direct strength method, which was developed for the design of cold-formed steel columns at normal room temperature, was also used in this study to predict the high strength steel column strengths at elevated temperatures. The suitability of these design rules for high strength steel columns at elevated temperatures is assessed. Generally, it is shown that the American and European specifications as well as the direct strength method conservatively predicted the column strengths of high strength steel at elevated temperatures. The European Code predictions are slightly more conservative than the American Specification and the direct strength method predictions.

Numerical investigation and design of aluminium alloy channel section columns at elevated temperatures

Design of high strength steel columns at elevated temperatures

Experimental and Numerical Study of 7A04-T6 Extruded Aluminium Alloy Lipped Angle Columns in Axial Compression

Design of Cold-Formed Stainless Steel RHS and SHS Beam–columns at Elevated Temperatures

BEHAVIOUR OF HIGH STRENGTH COLD-FORMED STEEL COLUMNS UNDER ELEVATED TEMPERATURES

Cold-formed steel lipped channel columns at elevated temperatures

Behaviour of Cold-Formed Stainless Steel Beams at Elevated Temperatures

Mechanical properties of 7A04-T6 high strength structural aluminium alloy at elevated temperatures and after cooling down

Experimental and Numerical Study of Fixed-Ended High-Strength Aluminum Alloy Angle-Section Columns

Numerical simulation of aluminum alloy 6082-T6 columns failing by overall buckling

Residual compressive behavior of 6063-T5 aluminium alloy SHS and RHS stub columns

Research on High-Temperature Constitutive Relationship of Aluminum Alloy

Flexural Buckling of High-Strength Aluminium Alloy CHS Columns

Experimental Investigation and Numerical Analysis of Pin-Ended Extruded Aluminium Alloy Unequal Angle Columns

Member capacity of cold-rolled aluminium alloy channel columns - part I: Experimental investigation

Flexural Buckling of Extruded High-Strength Aluminium Alloy SHS Columns

Study of Local Buckling Performance of 7075-T6 High-Strength Aluminium Alloy H-section Stub Columns

Experimental Investigation of Mechanical Properties of Aluminum Alloy at High and Low Temperatures

Formability Evaluation of Aluminum Alloy 6061-T6 Sheet at Room and Elevated Temperatures

Numerical Investigation and Design of Perforated Aluminium Alloy SHS and RHS Columns

Flexural Behaviour of 7A04-T6 High-Strength Aluminium Alloy SHS and RHS Beams under Moment Gradient